CarTechnoloGY
VAG 5th Key ADD - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: VAG 5th Key ADD (/showthread.php?tid=84960)



VAG 5th Key ADD - Bartelbee - 08-06-2021

Helo mates,
i need some advice.
Car: A4 B8 2012
I bought this car with one key, so i try to add a second one.
First i tried to unlock a used key, no success.
The second option i would like to try is to buy a key from audi dealer and than add the key to car.
My question: can i add a key from dealer to car without problems? 
I would use Xtool Pad 3 to add the key to the car.
Thank you very much.


RE: VAG 5th Key ADD - pepi - 08-06-2021

You can add the key without problems A4 2012 . I am not sure about Xtool but the other tools AVDI , VVDI2 ...are doing without problems.


RE: VAG 5th Key ADD - 12manux - 08-06-2021

with proper tools you can reset your key . (KD X2,VVDIPROG)
And you can add it with xtool pad no problem as long as you can read BCM2 data. Check the freq of the key first.


RE: VAG 5th Key ADD - Bartelbee - 08-06-2021

(08-06-2021, 09:42 AM)12manux Wrote:  with proper tools you can reset your key . (KD X2,VVDIPROG)
And you can add it with xtool pad no problem as long as you can read BCM2 data. Check the freq of the key first.
Thank you for your answers.
I tried to reset with KD X2. Did not Work. Because of the freq.
I already tried to re-add my Original Key with xtool. This works.
Whats with the key when i buy i it from the Audi dealer? Is the Key already prepared to be added? Like make Dealer key by xtool or vvdi with bcm Data ?


RE: VAG 5th Key ADD - raffy haddad - 08-06-2021

When you get dealer key you can learn it to car with pin code and dont forget must relearn the ezisting key also
Regards


RE: VAG 5th Key ADD - Bartelbee - 08-06-2021

(08-06-2021, 17:19 PM)raffy haddad Wrote:  When you get dealer key you can learn it to car with pin code and dont forget must relearn the ezisting key also
Regards
Hello, thank you for your answer.
Which Pin Code you mean ?
I'm quiet New to Immo topic.
Thank you.


RE: VAG 5th Key ADD - 12manux - 09-06-2021

Pin code of the car ,i don t know how xtool works ,i do it with VVDI2.

When i learn the key it asks for BCM2 dump and than it goes to learn process


RE: VAG 5th Key ADD - Bartelbee - 09-06-2021

(09-06-2021, 09:49 AM)12manux Wrote:  Pin code of the car ,i don t know how xtool works ,i do it with VVDI2.

When i learn the key it asks for BCM2 dump and than it goes to learn process

When i relearned my original key, xtool just start the process. No dump wehre needed.


RE: VAG 5th Key ADD - Milicija - 09-06-2021

I got Xtool Pad 3 also, did few keys with 5th immo. You can buy keys from aliexpress (i prefer WAKFLMS). There are some decent quality keys. First you will need to make a "dealer" key then you will program to the car. As long as you have 1 working key, no need to dissasembly anything as I remember smile

Have in mind, that if your car is with keyless entry, you need to look for keyless key, because they are more expensive and more rare.


RE: VAG 5th Key ADD - Bartelbee - 10-06-2021

(09-06-2021, 18:57 PM)Milicija Wrote:  I got Xtool Pad 3 also, did few keys with 5th immo. You can buy keys from aliexpress (i prefer WAKFLMS). There are some decent quality keys. First you will need to make a "dealer" key then you will program to the car. As long as you have 1 working key, no need to dissasembly anything as I remember smile

Have in mind, that if your car is with keyless entry, you need to look for keyless key, because they are more expensive and more rare.
Thank you very much for your answer.
I orderd one...in the discription they say is a new one...i will try.