Tool to read E60 06/2007 ECU to remap - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Tool to read E60 06/2007 ECU to remap (/showthread.php?tid=8533) |
Tool to read E60 06/2007 ECU to remap - nucar - 01-07-2015 Hi, Can you tell me the cheapest tools (functional) to read my BMW E60 06/2007 520d ECU and extract file to remap? Thanks! RE: Tool to read E60 06/2007 ECU to remap - bursuc - 01-07-2015 Fg tech v54 should do it good. make sure you got a charger connected to car battery RE: Tool to read E60 06/2007 ECU to remap - nucar - 01-07-2015 (01-07-2015, 14:07 PM)bursuc Wrote: Fg tech v54 should do it good. make sure you got a charger connected to car battery It can read by odb port or need to read directly on ECU? RE: Tool to read E60 06/2007 ECU to remap - rs@chip - 04-07-2015 You can read it by obd with mpps to but you need 13+ voltage.. RE: Tool to read E60 06/2007 ECU to remap - nucar - 08-07-2015 (04-07-2015, 04:04 AM)alex.eobd2 Wrote: You can read it by obd with mpps to but you need 13+ voltage.. It will work with mpps V12 ou V13 or i need to buy V16? 13+ voltage? with car running could be? RE: Tool to read E60 06/2007 ECU to remap - cdipower - 08-07-2015 (08-07-2015, 16:54 PM)nucar Wrote:(04-07-2015, 04:04 AM)alex.eobd2 Wrote: You can read it by obd with mpps to but you need 13+ voltage.. Not running ignition on good battery charger connected to car battery RE: Tool to read E60 06/2007 ECU to remap - rs@chip - 08-07-2015 I sloved the same car with mpps 13 but voltage must be 13+ if not crashed at 70-80% when writhing.. RE: Tool to read E60 06/2007 ECU to remap - nucar - 11-07-2015 (08-07-2015, 19:40 PM)alex.eobd2 Wrote: I sloved the same car with mpps 13 but voltage must be 13+ if not crashed at 70-80% when writhing.. I already tried with mpps and it don't read my ecu, mpps v13 chinese, in fact it was mpps v12, but the software is V13 and then i tried with V16 and still not read...... Where you get from your Mpps? My car is 06/2007. RE: Tool to read E60 06/2007 ECU to remap - rs@chip - 11-07-2015 Try ecu id first on edc16 on can..my mpps is china like most of them ) |