+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Bmw X6 2015 (/showthread.php?tid=86824)
Bmw X6 2015 - Liveros - 19-12-2023
Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!
RE: Bmw X6 2015 - volavka - 19-12-2023
write original files and see if problem goes or not
RE: Bmw X6 2015 - cipi gutuie - 20-12-2023
(19-12-2023, 20:56 PM)Liveros Wrote: Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!
inject cafd in bdc...most probability is that your tool delete coding file from bdc
need to use e-sys
if that doesnt work than your bdc is corupted
RE: Bmw X6 2015 - Liveros - 20-12-2023
(20-12-2023, 11:39 AM)cipi gutuie Wrote:(19-12-2023, 20:56 PM)Liveros Wrote: Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!
inject cafd in bdc...most probability is that your tool delete coding file from bdc
need to use e-sys
if that doesnt work than your bdc is corupted
i recode with e-sys , no change, i programing i level, no change
(19-12-2023, 23:16 PM)volavka Wrote: write original files and see if problem goes or not
no change with original state files ...still this problem
any ideea ? maybe i corupted eeprom ? can anyone to verify that ?
any ideea ? maybe i corupted eeprom ? can anyone to verify that ?
RE: Bmw X6 2015 - BMWzone - 20-12-2023
Post original and calc dump of 95256
RE: Bmw X6 2015 - Liveros - 21-12-2023
(20-12-2023, 22:14 PM)BMWzone Wrote: Post original and calc dump of 95256
i have only eep backup
RE: Bmw X6 2015 - BMWzone - 21-12-2023
(21-12-2023, 14:01 PM)Liveros Wrote:(20-12-2023, 22:14 PM)BMWzone Wrote: Post original and calc dump of 95256
i have only eep backup
Was this read by BDC before or after problem ?
RE: Bmw X6 2015 - Liveros - 21-12-2023
before ..this is read before problem
RE: Bmw X6 2015 - BMWzone - 22-12-2023
The priority was to write this dump after problem, now that the BDC has undergone the flash/upgrade the contents of eprom have changed. Inside the file I found the value that was lost for me, you need to use a tool that clones it and I Can restores the value