Read 93C66 with CH341A (OPEL GID) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: Read 93C66 with CH341A (OPEL GID) (/showthread.php?tid=88888) |
Read 93C66 with CH341A (OPEL GID) - MasterMulder - 15-02-2024 Hi, I need to read the dump from a 93C66 eeprom (Opel Old GID), I only have a CH341A Programmer, is there a way to modify/use it for this chip? Thanks in advance, best regards RE: Read 93C66 with CH341A (OPEL GID) - Shooting - 16-02-2024 (15-02-2024, 13:23 PM)MasterMulder Wrote: Hi, No, buy correct programmer for the job wbr RE: Read 93C66 with CH341A (OPEL GID) - MasterMulder - 16-02-2024 (16-02-2024, 16:02 PM)Shooting Wrote:(15-02-2024, 13:23 PM)MasterMulder Wrote: Hi, Even with this procedure: [url=https://www.youtube.com/watch?v=MpQW9jAWfQw&ab_channel=GabrielCirvini]https://www.youtube.com/watch?v=MpQW9jAWfQw&ab_channel=GabrielCirvini or https://www.youtube.com/watch?v=hPKckby54uA&ab_channel=DrShock which economical programmer can I buy instead? thanks in advance RE: Read 93C66 with CH341A (OPEL GID) - al70 - 16-02-2024 you need this, not expensive RE: Read 93C66 with CH341A (OPEL GID) - MasterMulder - 16-02-2024 (16-02-2024, 19:08 PM)al70 Wrote: you need this, not expensive Thank You, can I buy only the EZP2023+ with its usb cable and clip or I need the full set of adapter? Also, can I read the 93c66 without desolder it? Thanks in advance |