+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Ford Kuga SID206 DPF off (/showthread.php?tid=89308)
Ford Kuga SID206 DPF off - Carremapper - 24-02-2024
Hi,
I would need a tested solution for a Ford Kuga 2.0 TDCi DPF off.
A few solutions were tested before, like by Swiftec, Ecudecoder, DaVinci Deluxe etc. however the car regenerates frequently in a few hunderds of kms even if when the exhaust temperature linearisations were set to 0°C (Switftec puts them to 700degs...). I have ForScan to reset DPF parameters at every trial.
Is there a solution with differential sensor unplugged?
Thank you!
[attachment=185166]
RE: Ford Kuga SID206 DPF off - bel1simQ - 24-02-2024
(24-02-2024, 20:48 PM)Carremapper Wrote: Hi,
I would need a tested solution for a Ford Kuga 2.0 TDCi DPF off.
A few solutions were tested before, like by Swiftec, Ecudecoder, DaVinci Deluxe etc. however the car regenerates frequently in a few hunderds of kms even if when the exhaust temperature linearisations were set to 0°C (Switftec puts them to 700degs...). I have ForScan to reset DPF parameters at every trial.
Is there a solution with differential sensor unplugged?
Thank you!
Write this and unplug diff sensor. pass in pm. press thanks and rep if helped