+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Peugeot 206 2003MY odomenter correction need (/showthread.php?tid=89511)
Pages:
1
2
Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
Hi Friends
I need to correct odometer.
After replacing the counter (dashboard)
- old dashboard 290k
- new used dashboard 410k
I need the new one to change the mileage to the old one, i.e. 290k.
I will post photos of the meters later.
1. Is the mileage in this counter in EEPROM or MCU?
2. What about BSI? How to check the mileage in BSI? And is he even there?
3. After installing a new odometer with a higher mileage, should the BSI mileage (290k) be transferred to the new odometer?
4. What tool will I use to do it through the OBD2 connector? Is it possible or not?
5. Please provide instructions on how to perform this activity.
Regards.
RE: Peugeot 206 2003MY odomenter correction need - GoldRush - 29-02-2024
Hi you have to do dash and bsi , if you connect new dash bsi take now 410k.
RE: Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
(29-02-2024, 12:19 PM)GoldRush Wrote: Hi you have to do dash and bsi , if you connect new dash bsi take now 410k.
That's exactly what happened.
Now I have 410k on DASH.
What now?
Do I need to correct DASH and BSI separately?
Is it enough to correct the BSI and then DASH will rewrite the new/corrected BSI mileage?
Is it possible to make corrections in BSI or DASH or both with some device? E.g. Digiprog? Iprog+? Carprog via OBD2 connector?
RE: Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
i need pinology for this odometer from 206 peugeot
RE: Peugeot 206 2003MY odomenter correction need - al70 - 29-02-2024
is there only 1 connector on the back of the cluster ?
RE: Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
(29-02-2024, 18:27 PM)al70 Wrote: is there only 1 connector on the back of the cluster ?
yes, only ONE
RE: Peugeot 206 2003MY odomenter correction need - al70 - 29-02-2024
At your own risk, what are you trying to do ? If you need to correct odometer you must remove needles to access the eeprom
RE: Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
(29-02-2024, 19:38 PM)al70 Wrote: At your own risk, what are you trying to do ? If you need to correct odometer you must remove needles to access the eeprom
yes, I want to make a mileage correction,
I wonder if I can do it using the pins in the socket
(I have digiprog, carprog devices) Is it possible?
I also need a transmission line in this socket.
RE: Peugeot 206 2003MY odomenter correction need - al70 - 29-02-2024
i don't think it will work through the pins, open cluster and see what chip is inside, this software is quite good for correction
https://cartechnology.co.uk/showthread.php?tid=69372
RE: Peugeot 206 2003MY odomenter correction need - roanoke - 29-02-2024
(29-02-2024, 20:43 PM)al70 Wrote: i don't think it will work through the pins, open cluster and see what chip is inside, this software is quite good for correction
https://cartechnology.co.uk/showthread.php?tid=69372
Maybe it's a good program, but there is no 206 model there