+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: FIAT EDC16C39 read/write (/showthread.php?tid=89514)
FIAT EDC16C39 read/write - isamyku - 29-02-2024
Hello everyone!
Newbie here - hope I can get some help
I have a 2011 Fiat Ducato 2.3 with Bosch EDC16C39 ECU that have a problem with the EGR. I want to delete it and have the P0403 DTC removed as well.
Bought a MPPS V21 chinese clone tool for the purpose, managed to read the ECU (I think), filesize is 2MB, used DaVinci to remove EGR and DTC but cannot write it back to the vehicle.
I am trying through OBD.
Is it possible to be done at all? Or I need another tool?
Thanks in advance!
RE: FIAT EDC16C39 read/write - bogdanwmw - 29-02-2024
Safe is read in bench mode or bdm !
RE: FIAT EDC16C39 read/write - boby1979 - 25-04-2024
(29-02-2024, 09:50 AM)isamyku Wrote: Hello everyone!
Newbie here - hope I can get some help
I have a 2011 Fiat Ducato 2.3 with Bosch EDC16C39 ECU that have a problem with the EGR. I want to delete it and have the P0403 DTC removed as well.
Bought a MPPS V21 chinese clone tool for the purpose, managed to read the ECU (I think), filesize is 2MB, used DaVinci to remove EGR and DTC but cannot write it back to the vehicle.
I am trying through OBD.
Is it possible to be done at all? Or I need another tool?
Thanks in advance!
maybe its the problem of checksum
RE: FIAT EDC16C39 read/write - YGRemaps - 25-04-2024
(29-02-2024, 09:50 AM)isamyku Wrote: Hello everyone!
Newbie here - hope I can get some help
I have a 2011 Fiat Ducato 2.3 with Bosch EDC16C39 ECU that have a problem with the EGR. I want to delete it and have the P0403 DTC removed as well.
Bought a MPPS V21 chinese clone tool for the purpose, managed to read the ECU (I think), filesize is 2MB, used DaVinci to remove EGR and DTC but cannot write it back to the vehicle.
I am trying through OBD.
Is it possible to be done at all? Or I need another tool?
Thanks in advance!
This ecu have 2 codeblocks for stage 1 obd read is enought, but for EGR off need full read ( ktag open cover, kt200,foxflash,pcm flash for bench read )