ISTA 4.46.xx problems and possible solution - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA 4.46.xx problems and possible solution (/showthread.php?tid=89618) |
RE: ISTA 4.46.xx problems and possible solution - weinerbarn - 03-03-2024 I noticed other tools like Best don't work after copying either. Gives a password error. I even changed the INI paths for EDIABAS. Ended up just copying the old files back and it works fine. RE: ISTA 4.46.xx problems and possible solution - blax123 - 04-03-2024 i replaced the ediabas folder, then ista is fast again but standard tools not working. then i replaced ediabas.ini, tool32.ini, remote.ini, obd.ini with my old ones, after this standard tools working but ista slow again. seems just to be just a setting thing in ini. RE: ISTA 4.46.xx problems and possible solution - dardan - 04-03-2024 I cant make ISTA P to work together with ISTA 4.46.xx ... if i install ediabas 7.3.0 then ISTA 4.46.xx does not work for me... using ICOM NEXT clone RE: ISTA 4.46.xx problems and possible solution - Sedoy - 04-03-2024 (04-03-2024, 14:36 PM)dardan Wrote: I cant make ISTA P to work together with ISTA 4.46.xx ... if i install ediabas 7.3.0 then ISTA 4.46.xx does not work for me... using ICOM NEXT clone Why you install Ediabas for ISTA-P? It have self ediabas inside. RE: ISTA 4.46.xx problems and possible solution - dardan - 04-03-2024 I get this all the time "ISTA P error 94201 Technical service initialization failed" solution i read was to install patched ediabas. RE: ISTA 4.46.xx problems and possible solution - BugFix - 04-03-2024 You can delete the Ediabas folder, perform a Format C://, or simply remove the entry in the environment variables https://cartechnology.co.uk/attachment.php?aid=186115 RE: ISTA 4.46.xx problems and possible solution - Red_bean_bun - 05-03-2024 Just curious - if both sets of applications have their own Ediabas - why would ISTA be making calls to ST’s Ediabas ? Does ISTA use the environment path to ediabas.ini as well ? (02-03-2024, 17:33 PM)Sedoy Wrote: Since not everyone has problems with the new version, I think it's because not everyone installs a second version of Ediabas, e.g. with StandardTools. The problem exists because two different versions of Ediabas(v7.3.0 in StandardTools and v7.6.0 in ISTA) apparently lead to problems in ISTA. This situation cannot happen in a BMW workshop because only ISTA is installed there, which is why no one at BMW will have noticed it. (04-03-2024, 22:02 PM)BugFix Wrote: You can delete the Ediabas folder, perform a Format C://, So this environment variable is used by both ISTA and Standard Tools ? RE: ISTA 4.46.xx problems and possible solution - Node - 05-03-2024 ISTA's internal ediabas DOES use that variable. RE: ISTA 4.46.xx problems and possible solution - sebastianfernandes - 05-03-2024 Thanks to @sedoy and @bugfix to pointing out in the right direction, and Here is fix for this mess. I have edited ediabas.ini in both ista and ediabas. With this my ista works perfect and also INPA/tool32/etc. Copy both to respective ediabas location and ista location, assuming ediabas is installed in c:\ediabas, because .ini file is edited according to that. Also make sure you delete entry in SYSTEM VARIABLE ediabas_config_dir. This works and tried it on my F20. Glad to help. If I helped then please thanks+rep RE: ISTA 4.46.xx problems and possible solution - Cerhio - 05-03-2024 (05-03-2024, 08:32 AM)sebastianfernandes Wrote: Thanks to @sedoy and @bugfix to pointing out in the right direction, and Here is fix for this mess. I have edited ediabas.ini in both ista and ediabas. With this my ista works perfect and also INPA/tool32/etc. Copy both to respective ediabas location and ista location, assuming ediabas is installed in c:\ediabas, because .ini file is edited according to that. Also make sure you delete entry in SYSTEM VARIABLE ediabas_config_dir. Hey. Your files help me as well What did you change exactly in it? |