+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA 4.46.xx problems and possible solution (/showthread.php?tid=89618)
RE: ISTA 4.46.xx problems and possible solution - evaldazj - 14-03-2024
(12-03-2024, 15:55 PM)beemered Wrote:(12-03-2024, 14:34 PM)Node Wrote:(12-03-2024, 14:04 PM)beemered Wrote: Another issue with this release.
After scanning a car, ISTA shows all modules green while there are errors. The modules with errors are no longer yellow.
Sounds like your ISTA is NOT in ISTA+ mode... As no problem with yellow faulty units here.
Thanks Node, ISTA+ mode was the solution.
How do You change to ISTA+?
RE: ISTA 4.46.xx problems and possible solution - Vojno - 14-03-2024
(14-03-2024, 08:18 AM)evaldazj Wrote:(12-03-2024, 15:55 PM)beemered Wrote:(12-03-2024, 14:34 PM)Node Wrote:(12-03-2024, 14:04 PM)beemered Wrote: Another issue with this release.
After scanning a car, ISTA shows all modules green while there are errors. The modules with errors are no longer yellow.
Sounds like your ISTA is NOT in ISTA+ mode... As no problem with yellow faulty units here.
Thanks Node, ISTA+ mode was the solution.
How do You change to ISTA+?
including but not limited to:
\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold
"BMW.Rheingold.OperationalMode" ISTA_PLUS
RE: ISTA 4.46.xx problems and possible solution - donke - 17-03-2024
Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).
At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.
RE: ISTA 4.46.xx problems and possible solution - Red_bean_bun - 17-03-2024
(17-03-2024, 07:43 AM)donke Wrote: Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).
At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.
Did you flash your icom with the .22 version of the firmware ?
RE: ISTA 4.46.xx problems and possible solution - bennymx - 17-03-2024
(17-03-2024, 08:21 AM)Red_bean_bun Wrote:(17-03-2024, 07:43 AM)donke Wrote: Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).
At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.
Did you flash your icom with the .22 version of the firmware ?
He must have because 4.46.1x requires it for the ICOM to work. No other choice. I found that if you did not update your ICOM in 4.45.3x and went to 4.46.1x and tried to update it was bugged. ISTA would not update the ICOM. Even with the firmware in shared storage and installed. It needs to be done via the web interface manually. 4.46.1x is full of bugs.
RE: ISTA 4.46.xx problems and possible solution - Node - 17-03-2024
I have updated ICOM using ISTA 4.46.1x. Have NO idea where you find those bugs...
RE: ISTA 4.46.xx problems and possible solution - CATAHA - 17-03-2024
HERE is a link for you to get you started
(17-03-2024, 07:43 AM)donke Wrote: ............I will try to figure it out in more detail next week.
RE: ISTA 4.46.xx problems and possible solution - donke - 18-03-2024
I had version 4.46.2x but will update today to the newest version. I will also check my icoms firmware. Thank you all for your information.
RE: ISTA 4.46.xx problems and possible solution - NeRkO20 - 18-03-2024
So just to be updated...parallel using ista+ and NCS/inpa is not possible right?
I mean using them as long as ista+ is connected to car...
I did that very often...
Now (without any of the solutions here) I have to close ista+ to be able to run f.e. ncs.
RE: ISTA 4.46.xx problems and possible solution - glesic1 - 20-03-2024
(17-03-2024, 13:36 PM)Node Wrote: I have updated ICOM using ISTA 4.46.1x. Have NO idea where you find those bugs...
Hi ! seems you are only one what is update icom firmware from ista manager from version 4.46
every Bmw dealer or independat services have this problem with updating icom from ista manager!
please if any other here sucessuful update icom please send feedback thnx !!