+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA 4.46.xx problems and possible solution (/showthread.php?tid=89618)
RE: ISTA 4.46.xx problems and possible solution - Twointje - 27-03-2024
(26-03-2024, 17:43 PM)vierchatura Wrote: While not deleted the Enviroment Variable ediabas_config_dir and using Node patched api32.dll in C:\EDIABAS\BIN ISTA very slow with ENET cable.
Tried replace C:\EDIABAS\BIN to 7.6 then INPA works very slow.
Deleted Enviroment Variable ediabas_config_dir and using Ediabas 7.3 with patched api32.dll both ISTA and INPA works normal
Hello..
I read your comment ,but i can't find Node patched api32.dll.
I dont think Node posted that .
Best regards.
RE: ISTA 4.46.xx problems and possible solution - kn6600 - 27-03-2024
(27-03-2024, 10:42 AM)Twointje Wrote: Hello..
I read your comment ,but i can't find Node patched api32.dll.
I dont think Node posted that .
Best regards.
Patched api32.dll is in the 1st post .
RE: ISTA 4.46.xx problems and possible solution - Twointje - 27-03-2024
(27-03-2024, 14:15 PM)kn6600 Wrote:(27-03-2024, 10:42 AM)Twointje Wrote: Hello..
I read your comment ,but i can't find Node patched api32.dll.
I dont think Node posted that .
Best regards.
Patched api32.dll is in the 1st post .
I know on what post the patched api32.dll is , I just responded to the previous member because Node never posted that api32.dll
RE: ISTA 4.46.xx problems and possible solution - vierchatura - 27-03-2024
Sorry my mistake. Api32.dll from 1st post
RE: ISTA 4.46.xx problems and possible solution - BugFix - 27-03-2024
;VehicleProtocol = DoIP,HSFZ
VehicleProtocol = HSFZ
RE: ISTA 4.46.xx problems and possible solution - snf11lci - 27-03-2024
(27-03-2024, 17:55 PM)BugFix Wrote: ;VehicleProtocol = DoIP,HSFZ
VehicleProtocol = HSFZ
What it fix ? DHCP problem or slow ista scan ?
RE: ISTA 4.46.xx problems and possible solution - Node - 27-03-2024
(27-03-2024, 18:58 PM)snf11lci Wrote:(27-03-2024, 17:55 PM)BugFix Wrote: ;VehicleProtocol = DoIP,HSFZ
VehicleProtocol = HSFZ
What it fix ? DHCP problem or slow ista scan ?
IMHO - nothing. Tried that.
P.S. Those who complain about slow scan using ICOM - PROVIDE your LOGS!!! Now many complaints and no proof or way to find a reason... If not using ICOM/similar, this setting has NO effect WHATSOEVER.
RE: ISTA 4.46.xx problems and possible solution - ravager - 30-03-2024
(17-03-2024, 07:43 AM)donke Wrote: Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).
At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.
I'm having the same issue.
I put the patched api32.dll inside BMW\ISPI\TRIC\ISTA\Ediabas\BIN
Remote connection through IFHSRV (and kdcan) is very fast in ISTA now.
However ENET is very slow. Scanning F10 took more than 20 minutes.
Did you find any other solution @donke?
RE: ISTA 4.46.xx problems and possible solution - hulahans - 31-03-2024
After Copying ista ediabas to ec apps ediabas .
Ista via Enet cable and enet Connection in Ista fault read out on G20 2:14 min
Ista via Enet cable and Ediabas Connection in Ista a lot faster with 1:18 min
RE: ISTA 4.46.xx problems and possible solution - Red_bean_bun - 31-03-2024
(31-03-2024, 18:14 PM)hulahans Wrote: After Copying ista ediabas to ec apps ediabas .
Ista via Enet cable and enet Connection in Ista fault read out on G20 2:14 min
Ista via Enet cable and Ediabas Connection in Ista a lot faster with 1:18 min
What about using ISTA via obd cable ?