ISTA 4.46.xx problems and possible solution - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA 4.46.xx problems and possible solution (/showthread.php?tid=89618) |
RE: ISTA 4.46.xx problems and possible solution - hulahans - 31-03-2024 Don t know, i use enet via OBD RE: ISTA 4.46.xx problems and possible solution - Red_bean_bun - 31-03-2024 (31-03-2024, 20:44 PM)hulahans Wrote: Don t know, i use enet via OBD Tried 7.6 Ediabas as with E series on ISTA ? RE: ISTA 4.46.xx problems and possible solution - BobbySD - 02-04-2024 Hello together, Im still struggling with my ista, i know what is the problem but i dont know how to change it problem is the interface/protocol when connecting with ista set to icom local network. If interface is set to enet: like on the screenshot it simply doesnt work and during vehicle identification only few informations are available. If i use ista set to ediabas its working and super fast, in that case i can see in ediabas interface remote. So i need to change the interface but i didnt found it in ista config, icom admin nowhere. Ediabas.ini doesnt have effect on it. Somebody will know maybe? RE: ISTA 4.46.xx problems and possible solution - CATAHA - 03-04-2024 EDIABAS.INI File has been changed so that people will start see changes I'm thinking it's BETA version, it will be revised as time goes on. ( If BMW Engineers NOT_SMART then will see NEW VERSION OF ICOM SOON, Else BMW Engineers Smart then we can still use OLD ICOM_A1/A2 versions for new/old cars ELSEIF ACTIA Bribes BMW CEO/Management then will see NEW ICOM for new cars ) As i was saying before in my reviews post HERE "VehicleProtocol = DoIP,HSFZ ; (Can be reversed HSFZ,DoIP) HSFZ = Older cars/ways e60/e70/e90/etc ( 1:1, 1_ICOM<>1PC , HSFZ was designed to run on 6801 port but nowhere does it say that 6811 port should be changed, so keep that in mind when troubleshooting connection problems ) DoIP = Newer cars/way, FANCY F20/G02 (3:1, 3xICOM<>1PC, 1:1, 1_ICOM<>1PC ) " "....... Code: ; Outcommented due to this Defect https://atc.bmwgroup.net/jira/browse/ISTA-51540 needs to be changed again! ......" Can anyone with ATC BMW access post info on " ISTA-51540 " defect ? Thanks in advance RE: ISTA 4.46.xx problems and possible solution - NeRkO20 - 04-04-2024 (05-03-2024, 08:32 AM)sebastianfernandes Wrote: Thanks to @sedoy and @bugfix to pointing out in the right direction, and Here is fix for this mess. I have edited ediabas.ini in both ista and ediabas. With this my ista works perfect and also INPA/tool32/etc. Copy both to respective ediabas location and ista location, assuming ediabas is installed in c:\ediabas, because .ini file is edited according to that. Also make sure you delete entry in SYSTEM VARIABLE ediabas_config_dir. Does this allow you to use ISTA and be connected to car and to connect at same time with for example INPA or NCS? Did you try it? RE: ISTA 4.46.xx problems and possible solution - Sedoy - 04-04-2024 (03-04-2024, 18:14 PM)CATAHA Wrote: "VehicleProtocol = DoIP,HSFZ ; (Can be reversed HSFZ,DoIP) That's really wrong! HSFZ = all actual F-,G- and I-Series. Protocol for ENET. Never for E-Series! DoIP = coming with new Cars at end of 2024. RE: ISTA 4.46.xx problems and possible solution - CATAHA - 04-04-2024 Yes i know it, It's for Sound, Navigation and Other big and constant data travel along with E-NET Cable(capable cars), that's why i posted e60/e70/e90 and NOT e32/e30/e39/e36/<---year.2000 To give ppl an idea But O.K. then i guess, back in 2008 there was no F/G/Etc series yet (04-04-2024, 14:20 PM)Sedoy Wrote:(03-04-2024, 18:14 PM)CATAHA Wrote: "VehicleProtocol = DoIP,HSFZ ; (Can be reversed HSFZ,DoIP) RE: ISTA 4.46.xx problems and possible solution - redog4dy - 21-04-2024 Hello, sorry to post lately, just updated to latest ista. I tried 1st method to copy api_dll but ista launcher detected to repair ista.. 2nd options was to copy ista/bin to c/ediabas/bin is reading fast now but i think tool32 not working anymore. Anyone can please advise me witch methos is better in order to work faster ista and also keep others tools to work? Regards, RE: ISTA 4.46.xx problems and possible solution - larshutten - 21-04-2024 Just disable ista launcher in computer management. RE: ISTA 4.46.xx problems and possible solution - NeRkO20 - 21-04-2024 (21-04-2024, 12:14 PM)larshutten Wrote: Just disable ista launcher in computer management. how do u mena "disable"? just stop starting automatically at windows start....or how? |