+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: MHI2 usa to eu problem A3 (/showthread.php?tid=89863)
MHI2 usa to eu problem A3 - goontii - 08-03-2024
Hello Everyone
I have Audi a3 8v USA with MHI2 AU37. I do conversion and everyrhinks is working. But after conversion display not hide. All the time is up. When I do ignition off is the same on display, it is black, but not closing. Maybe someone has the similar problem?
Thx
RE: MHI2 usa to eu problem A3 - fls - 09-03-2024
Yes , you have updated a wrong module which you should not have selected.
Post the firmware screenshot
FC2H37xE , this module you have updated , you need to put back the firmware of USA and ONLY apply this part of module , everything else should be N. This will fix the issue.
If you are not familiar do not touch it . I take no responsibility.
RE: MHI2 usa to eu problem A3 - Navigationmaster - 10-03-2024
Hi downgrade/reflash to usa software your keayboard/control panel
RE: MHI2 usa to eu problem A3 - goontii - 10-03-2024
Thanks for answer. Thanks Friends