CarTechnoloGY
1F2108 DME incorrect data record ,variant monitoring - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: 1F2108 DME incorrect data record ,variant monitoring (/showthread.php?tid=90163)

1F2108 DME incorrect data record ,variant monitoring - prikitiew - 16-03-2024

2024-3-9-18-48-33_TC1797_DFlash.rar
File Type: .rar
Downloaded: 0 times
Size: 7.17 KB

2024-3-9-18-50-19_1037519068_TC1797_PFlash.rar
File Type: .rar
Downloaded: 0 times
Size: 1.17 MB

202403091725_P_FLASH_XEP100 cas4.rar
File Type: .rar
Downloaded: 0 times
Size: 267.71 KB

202403091725_D_FLASH_XEP100 cas4.rar
File Type: .rar
Downloaded: 0 times
Size: 5.44 KB


Hi there.need help from the expert.
I have changed dme mevd 1724 N20 engine.Old DME is damaged and can't be read by any scanner.Installed new donor DME from another vehicle.I already enter the ISN and the VIN original car.But that error always came up and the drive train fault remains on the screen.
Here I attach my CAS original file and the dme donor        

RE: 1F2108 DME incorrect data record ,variant monitoring - cipi gutuie - 16-03-2024

(16-03-2024, 08:24 AM)prikitiew Wrote:  Hi there.need help from the expert.
I have changed dme mevd 1724 N20 engine.Old DME is damaged and can't be read by any scanner.Installed new donor DME from another vehicle.I already enter the ISN and the VIN original car.But that error always came up and the drive train fault remains on the screen.
Here I attach my CAS original file and the dme donor

Is not enough isn and vin
Need reset working hours,flash and coding with corect sw for this car

RE: 1F2108 DME incorrect data record ,variant monitoring - prikitiew - 16-03-2024

(16-03-2024, 08:56 AM)cipi gutuie Wrote:  
(16-03-2024, 08:24 AM)prikitiew Wrote:  Hi there.need help from the expert.
I have changed dme mevd 1724 N20 engine.Old DME is damaged and can't be read by any scanner.Installed new donor DME from another vehicle.I already enter the ISN and the VIN original car.But that error always came up and the drive train fault remains on the screen.
Here I attach my CAS original file and the dme donor

Is not enough isn and vin
Need reset working hours,flash and coding with corect sw for this car


tell me how to reset working hours please ? already programmed with bmw cgdi but not working