+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Damaged the EEPROM 95128 in FEM (/showthread.php?tid=90776)
Damaged the EEPROM 95128 in FEM - wxwwxw - 31-03-2024
I have a FEM with a key on the table that I use to test the NBT unit
I damaged the EEPROM in FEM, two legs of the 95128 system.
Now in FEM it disconnects the contactor cyclically.I need the contents of this memory to run FEM. Next, I will try to add the cleaned key using the BMWExplorer 2018.12 clone.
Can anyone share the contents of memory 95128 for such a FEM module?
RE: Damaged the EEPROM 95128 in FEM - DSESET86 - 31-03-2024
(31-03-2024, 13:49 PM)wxwwxw Wrote: I have a FEM with a key on the table that I use to test the NBT unit
I damaged the EEPROM in FEM, two legs of the 95128 system.
Now in FEM it disconnects the contactor cyclically.I need the contents of this memory to run FEM. Next, I will try to add the cleaned key using the BMWExplorer 2018.12 clone.
Can anyone share the contents of memory 95128 for such a FEM module?
here you go
RE: Damaged the EEPROM 95128 in FEM - wxwwxw - 02-04-2024
Thanks, it works very well.
I thought that after uploading the contents of memory 95128 from another FEM, I would lose the key, but here's a surprise. The key works.
RE: Damaged the EEPROM 95128 in FEM - DSESET86 - 03-04-2024
Your welcome. Glad it helped!
RE: Damaged the EEPROM 95128 in FEM - Jumper - 05-04-2024
What did you do with your wakeup WUP with a donor eeprom? Did you have to reset the key? Did you have central locking and ignition without a key on the coil?
RE: Damaged the EEPROM 95128 in FEM - wxwwxw - 08-04-2024
I had a FEM+ Key assembled on a table with a start-stop button and a coil.
I damaged the EEPROM in FEM. But as it turned out, the key memory is not stored in 95128. The old key turns on the ignition
RE: Damaged the EEPROM 95128 in FEM - Jumper - 08-04-2024
(08-04-2024, 07:14 AM)wxwwxw Wrote: I had a FEM+ Key assembled on a table with a start-stop button and a coil.
I damaged the EEPROM in FEM. But as it turned out, the key memory is not stored in 95128. The old key turns on the ignition
The WUP is in the eeprom for key detection