reccomendation for ecu programming hardware for edc17c10 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: reccomendation for ecu programming hardware for edc17c10 (/showthread.php?tid=91062) |
reccomendation for ecu programming hardware for edc17c10 - theno1pars - 07-04-2024 hi all I am looking to read and write my Peugeot 1.4hdi edc17c10 ecu can someone recommend a cheapish tool to read and write this ecu.I am looking to immo off and probably dpf and egr off with a stage 1 tune. I am a newbie to this but have experience repairing phones and laptops etc as well as being a retired mechanic. RE: reccomendation for ecu programming hardware for edc17c10 - ROD-BENDERS - 07-04-2024 Pcmflash dongle module 71 (china) Scanmatik 2 clone with egpt boot cable Job done RE: reccomendation for ecu programming hardware for edc17c10 - theno1pars - 07-04-2024 (07-04-2024, 15:20 PM)ROD-BENDERS Wrote: Pcmflash dongle module 71 (china) thanks for the super quick reply do i need the pin code for the car to do it as i havent got it??? is there any tutorials available to follow as it will be my first ecu flash.I am presuming i will need other software aswell to modify the flash files. RE: reccomendation for ecu programming hardware for edc17c10 - al70 - 07-04-2024 in the folder is a link to the equipment you need for reading your ecu and many more, the link below is to all the connections you'll need, if you don't know how to edit files yourself i advise you to just read the files with the tool in the folder and post the files here for immo/dpf/egr, whatever modifications you need, you wont learn how to modify files yourself overnight, no matter how many phones you've repaired, best of luck, any more questions, just ask. https://cartechnology.co.uk/showthread.php?tid=76537 RE: reccomendation for ecu programming hardware for edc17c10 - theno1pars - 07-04-2024 (07-04-2024, 15:55 PM)al70 Wrote: in the folder is a link to the equipment you need for reading your ecu and many more, the link is to all the connections you'll need, if you don't know how to edit files yourself i advise you to just read the files with the tool in the folder and post the files here for immo/dpf/egr, whatever modifications you need, you wont learn how to modify files yourself overnight, no matter how many phones you've repaired, best of luck, any more questions, just ask. thanks for the link to the hardware.I have just purchased it but do i still need a gpt boot cable also? I have bookmarked a godiag gpt boot cable on ebay just incase. RE: reccomendation for ecu programming hardware for edc17c10 - al70 - 07-04-2024 the gpt cable comes with the hardware in the link, no need to buy anything else, connection diagrams are in the green link in the post RE: reccomendation for ecu programming hardware for edc17c10 - banza - 07-04-2024 amt bst goldbox does de job well, i have one RE: reccomendation for ecu programming hardware for edc17c10 - al70 - 07-04-2024 yeah banza, same s?@t different name but with scanmatic, you can use other software, forscan, techstream, etc.etc., good to have both though, especially if you don't have any experience prying open edc16's. |