ODIS + Tactrix Openport clone - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: ODIS + Tactrix Openport clone (/showthread.php?tid=91156) |
ODIS + Tactrix Openport clone - Prazcon - 09-04-2024 Hi all, I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS. In a lot of instances I can select the Openport in ODIS but and it tests out correctly but when I try to connect to a car, it gives an error. Please see attachments. Does anyone have an idea how to fix this? KR Mike RE: ODIS + Tactrix Openport clone - JorBo - 09-04-2024 For me never works on Odis 6.2 and newer. If you want to works with J2534, W10-W11 is required and cheap device for example, Godiag J2534 (not detect ignition) or VNCI that works "similar" to 5054 or 6154. RE: ODIS + Tactrix Openport clone - pupu144 - 09-04-2024 (09-04-2024, 14:14 PM)Prazcon Wrote: I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS. Some driver issues. I have no experience with Tactrix tools, but if the clone is using own drivers (not the same as the legit device) - this might be it, and it will never get fixed, as there is usually no support for clones. If it can work with the official driver from Tactrix website - well, try your luck and troubleshoot this issue with Tactrix dev team. (although I doubt it) |