+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: apix1 black screen fїж for 23-07 evo hw2.3 (/showthread.php?tid=91183)
APIX1 black screen fїж for 23-07 EVO HW2.3 - superwofy - 09-04-2024
I spent most of my time fїжing APIX2. However, since I've had to order a new panel for that
screen, I decided to look into making this ID3 screen I have here work with my NBTevo_Y23236I on HW2.3.
It's actually quite simple. It seems that HUJacintoStage1 now enforces voltage monitoring. The developers were kind enough to add a flag that disables said enforcement. All that has to be done is to create a file:
On the Jacinto side (SёяїдL/telnet/ssh):
PHP Code:
touch /var/opt/sys/APIX_VMON_OFF && \
sleep 5 && OnOffDSїсошmander appreset
Alternatively from OMAP:
PHP Code:
on -f hu-jacinto touch /var/opt/sys/APIX_VMON_OFF && \
sleep 5 && OnOffDSїсошmander appreset
After this the screen should turn on. After clearing DTCs, CID errors should not return.
Tested with HU 6829104 on NBTevo_Y23236I and CID 9252004.
Code:
<рдятIdentification>
<processClass>HWEL</processClass>
<id>000022E4</id>
<mainVersion>001</mainVersion>
<subVersion>002</subVersion>
<ратснVersion>003</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>CAFD</processClass>
<id>00001EF6</id>
<mainVersion>006</mainVersion>
<subVersion>064</subVersion>
<ратснVersion>013</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>BTLD</processClass>
<id>00001FFD</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002718</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002719</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>0000271A</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>0000271C</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>0000271E</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>0000271F</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002720</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002722</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002723</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>
<рдятIdentification>
<processClass>SWFL</processClass>
<id>00002727</id>
<mainVersion>007</mainVersion>
<subVersion>049</subVersion>
<ратснVersion>001</ратснVersion>
</рдятIdentification>RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - duke99 - 10-04-2024
Hi,thanks.Will this work for ID4 upgrade ID6 black screen?
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - painsage - 10-04-2024
Hi, will this work for ID5/6 with Apix1 screen?
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - superwofy - 10-04-2024
(10-04-2024, 06:02 AM)duke99 Wrote: Hi,thanks.Will this work for ID4 upgrade ID6 black screen?
(10-04-2024, 06:24 AM)painsage Wrote: Hi, will this work for ID5/6 with Apix1 screen?
It's all in the thread title, post and the screenshot.
What I've found is that it works for HW2.3 units (originally ID4) on the latest I-level using NBT (ID3) CIDs. I don't have other hardware available that I can use to confirm.
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - painsage - 10-04-2024
Just flashed my native ID6 HW 4.1 to 22-11, i want to use it with APIX1 for my E60. In var/opt/sys/ i don't see apix_vmon_off mentioned above. Any way to add the file and make it work?
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - BusyBox - 10-04-2024
How about reading VERY carefully the info provided?
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - painsage - 10-04-2024
(10-04-2024, 13:43 PM)BusyBox Wrote: How about reading VERY carefully the info provided?It is said in OP, to create the file, i missed that. I'm still learning to do anything with EVO, can someone give exact instructions on how to do this?
EDIT: Please excuse my lack of knowledge, i just ran the command with putty through SSH, i'm gonna test out and let you know.
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - painsage - 10-04-2024
UPDATE: On my unit, native ID6, 4gb RAM, GPS, DAB. After doing the OMAP method, i have a file created in the mentioned directory. The file is 0kb in size, and is empty when opened with notepad. This did NOT fїж the no signal/black screen issue. HU was powered on 4 times, 2 of those i got no signal. Very,very unfortunate, meaning i have to go back to 18-03 and hope that a reflash will fїж my screen mirroring issue.
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - superwofy - 10-04-2024
(10-04-2024, 22:32 PM)painsage Wrote: UPDATE: On my unit, native ID6, 4gb RAM, GPS, DAB. After doing the OMAP method, i have a file created in the mentioned directory. The file is 0kb in size, and is empty when opened with notepad. This did NOT fїж the no signal/black screen issue. HU was powered on 4 times, 2 of those i got no signal. Very,very unfortunate, meaning i have to go back to 18-03 and hope that a reflash will fїж my screen mirroring issue.
No signal is a slightly different issue. Is your coding correct? For me, the ID3 screen is always black not in No Signal state without that file.
Post the output of these commands:
PHP Code:
on -f hu-jacinto -t 14 -r 41
on -f hu-jacinto -t 14 -r 42
on -f hu-jacinto -t 14 -r 43
on -f hu-jacinto -t 14 -r 44
on -f hu-jacinto -t 14 -r 45
on -f hu-jacinto -t 14 -r 46
on -f hu-jacinto -t 14 -r 47
on -f hu-jacinto -t 14 -r 48
on -f hu-jacinto -t 14 -r 49
on -f hu-jacinto -t 14 -r 4A
on -f hu-jacinto -t 14 -r 4B
on -f hu-jacinto -t 14 -r 4C
on -f hu-jacinto -t 14 -r 4E
Also try running this a few times:
PHP Code:
on -f hu-jacinto apixconfig -t 14 -w 2F 01
What CID are you using?
RE: APIX1 black screen fїж for 18-03+ EVO HW2.3 - painsage - 10-04-2024
(10-04-2024, 22:41 PM)superwofy Wrote:Coding is good for apix1, it worked on 18-03 no problem, no signal/blackscreen didn't happen at all. I am using NBT ID3 8.8inch CID(10-04-2024, 22:32 PM)painsage Wrote: UPDATE: On my unit, native ID6, 4gb RAM, GPS, DAB. After doing the OMAP method, i have a file created in the mentioned directory. The file is 0kb in size, and is empty when opened with notepad. This did NOT fїж the no signal/black screen issue. HU was powered on 4 times, 2 of those i got no signal. Very,very unfortunate, meaning i have to go back to 18-03 and hope that a reflash will fїж my screen mirroring issue.
No signal is a slightly different issue. Is your coding correct? For me, the ID3 screen is always black not in No Signal state without that file.
Post the output of these commands:
PHP Code:on -f hu-jacinto -t 14 -r 41
on -f hu-jacinto -t 14 -r 42
on -f hu-jacinto -t 14 -r 43
on -f hu-jacinto -t 14 -r 44
on -f hu-jacinto -t 14 -r 45
on -f hu-jacinto -t 14 -r 46
on -f hu-jacinto -t 14 -r 47
on -f hu-jacinto -t 14 -r 48
on -f hu-jacinto -t 14 -r 49
on -f hu-jacinto -t 14 -r 4A
on -f hu-jacinto -t 14 -r 4B
on -f hu-jacinto -t 14 -r 4C
on -f hu-jacinto -t 14 -r 4E
Also try running this a few times:
PHP Code:on -f hu-jacinto apixconfig -t 14 -w 2F 01
What CID are you using?
I'm gonna try these commands tomorrow and let you know. Do i run them when i get a screen or when no signal is active?
This command: "
PHP Code:
on -f hu-jacinto apixconfig -t 14 -w 2F 01
EDIT: Forgot to mention, when i get no signal, a restart fїжes the issue and the HU works perfectly.