+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Audi a3 8p mirror puddle lights retrofit (/showthread.php?tid=91654)
Audi a3 8p mirror puddle lights retrofit - sebiosip - 21-04-2024
Hello, i tried to install puddle lights from exterior mirrors, my car is prefacelift, i changed my door modules with fl modules with 801/802J at final.
From the modules is missing the pin 10 from ambient lightghs (puddle), i introduced a pin where is missing and on test with vcds the lights are working but not working if i open door or open from key.
Is working just on test.
Can anyone have ideeas for this?
I tried with ch/lh active, inactive, same problem.
I don't know where is the problem
RE: Audi a3 8p mirror puddle lights retrofit - Marx - 27-04-2024
what tool are you using for coding?
in door-ecu:
+64 in coding would be DoorExit/Warning light enabled.
http://wiki.ross-tech.com/wiki/index.php/Audi_A3_(8P)_Door_Electronics_Driver
Good Luck,