+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: SKODA Octavia NX (MK4) Blind Spot Detection Retrofit (/showthread.php?tid=98542)
SKODA Octavia NX (MK4) Blind Spot Detection Retrofit - giannis20vt - 25-10-2024
I am thinking of retrofitting Lane Change Assist to my Octavia MY2023.
So far i am gathering information about this project.
I have some questions, if anyone can answer i would appreciate it.
1. The control units must be 2Q0907685E or G. Those units are not cheap. I found at Alixpress units with code starting from 2QD at deccent price. I wondering if i can buy them and flash with the 2Q0 software ? Is this posiible ?
2. Then i have to flash them with the correct parametres. Where i could find them ?
3. Do i need an online connection to (GEKO) to program the units ?
I have ODBeleven with PRO VAG Plan, so i can вурдs the SFD lock. I have also a Chinese 5054A cable with ODIS E and S.
Thank you in advance for your answers.
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - n3oka - 25-10-2024
You can flash it from 2QD to 2Q0, but the hardware ID will remain unchanged after flashing.
It's also necessary to remove the component protection using ODIS-S online.
Maybe someone has the correct dataset. I only have the dataset for the Golf 8 here.
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - vlahdacoroman - 25-10-2024
You need a SWAP activation for ACC function...only with code pin for LїСёи5ё5
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - slimshouki - 27-10-2024
Can be done
I did it for Audi A3 2024
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - giannis20vt - 02-11-2024
OK, thanks for your answers.
I started gathering stuff. Radars, brackets, wiring and so on.
Now i am searching for the changes i have to make apart from CP removal and dataset - parameters upload to the radars.
For example, code or adaptation on the dashboard, on the infotainment, ABS unit and ans so on.
I would appreciate any help.
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - slimshouki - 04-11-2024
2Q0 is highly recommended since all SWAPS can be циLoскёd
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - Cairus - 06-11-2024
Why do the control units have to be E or G? Of course index E and G are newer and better but D should work just as well.
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - giannis20vt - 06-11-2024
Fair enough.
The ETKA for my car (MY2023) gives codes in E and G. Of course, one can get a radar with a code ending in D, and upgrade its software. Can be done.
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - Cairus - 06-11-2024
The question is, for which index is the data set available, or maybe you can find used ones with index D. I don't see any reason to do an update unless there is a TPI or 5ёяvїcё measure/recall
RE: SKODA Octavia NX (MK4) Lane Assist Retrofit - giannis20vt - 06-11-2024
I have already bought new radars with H the last letter.
Right now i am searching information about coding, adaptation etc.