+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: IAW5 NF immo off please (/showthread.php?tid=9861)
Pages:
1
2
IAW5 NF immo off please - rs@chip - 08-09-2015
Hello m8s!
I have problem on fiat doblo IAW5 NF immo off...ImmoDec3.2 not working I made immo off totale on 95160 but car still not boot..where is the problem?here are my files can somewone check this and I need tested solution becouse is really urgent..thanks in any advance
RE: IAW5 NF immo off please - Abou-raffik - 08-09-2015
Try and report pass in box
d'ont forget thank and reput
good luck
RE: IAW5 NF immo off please - rs@chip - 09-09-2015
Hello
File not work..is there any solution to solve this?I think my file is rewriten..do I ned cut a wire or something on this ecu?
RE: IAW5 NF immo off please - wp74 - 14-09-2015
Try this
test and report
RE: IAW5 NF immo off please - rs@chip - 14-09-2015
File is not the problem..immo off is ok but eeprom is rewriten from bsi everytime when ecu is in sleep mode immo back..I dont no how to prevent sinhronization
RE: IAW5 NF immo off please - cubica - 15-09-2015
You have removed transponder from the key case??
cuby
RE: IAW5 NF immo off please - rs@chip - 15-09-2015
Yes I did..but immo back..
RE: IAW5 NF immo off please - pmroyal - 15-09-2015
Ecu must be wake up mode no sleep...make modify ecu suply wirings
RE: IAW5 NF immo off please - rs@chip - 15-09-2015
Yes but what then when batteri need to replace?customer will not be happy when battery diy and immo is back..better make virgin and adapt the key...
RE: IAW5 NF immo off please - yellowstilo - 15-09-2015
No, you have to cut the permanent +12v supply and connect the ecu side to the switched power supply after virginising - that way there is no rewriting possible after key-off....