[lustek]

Hi,

I try to adjustment mileage and vin in CAS2.
VIN change correct but now mileage in i5тд show -2 km. Cluster show 999998 and dot (virgin also).

Can someone check and/or prepare new eeprom for me?

Originally mileage was above 350k, don't remember exacly. Need to set 249000.

In attachement (.txt -> .bin): 
Ori -> original file
New -> after vin and mileage correction made by me

Thank you

[sixcode]

set your new file to zero, edit short vin, and set cluster to 353894

[tito2002]

Probably you change vin only in CAS, if it is different from IKE red dot appear.
mileage need only to 0, because it will extract from IKE.

Be more specific , VIN of other modules in your car is the one from new CAS or from old CAS?

[huzefa]

Hi,

I try to adjustment mileage and vin in CAS2.
VIN change correct but now mileage in i5тд show -2 km. Cluster show 999998 and dot (virgin also).

Can someone check and/or prepare new eeprom for me?

Originally mileage was above 350k, don't remember exacly. Need to set 249000.

In attachement (.txt -> .bin): 
Ori -> original file
New -> after vin and mileage correction made by me

Thank you

her is your file

[lustek]

set your new file to zero, edit short vin, and set cluster to 353894

Hi, 
So i should set CAS mileage to 0 and cluster mileage to value I want (249000km) yes?

[huzefa]

set your new file to zero, edit short vin, and set cluster to 353894

Hi, 
So i should set CAS mileage to 0 and cluster mileage to value I want (249000km) yes?

THE CAS FILE ITS DONE IF YOU TO DO THE CLUSTER TO BE (249000 KM) ITS OK YOU ONLY NEED TO EDIT THE CLUSTER VALUE OR IT WILL BE THE SAME OF THE ORIGINAL (353894 KM)