Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
Id4 -> id6 with latest software solution
|
11-05-2026, 14:34 PM,
Post: #1
|
|||
|
|||
|
Id4 -> id6 with latest software solution
Anyone willing to sell info on the trick to flashing id4 -> id6 with latest software without rebooting issue?
|
|||
|
12-05-2026, 12:08 PM,
Post: #2
|
|||
|
|||
|
RE: Id4 -> id6 with latest software solution
|
|||
| Reputation: +1 - luntik [+1] | |||
|
15-05-2026, 18:17 PM,
Post: #3
|
|||
|
|||
RE: Id4 -> id6 with latest software solution
(12-05-2026, 12:08 PM)DieStream Wrote:(11-05-2026, 14:34 PM)It3_Magic Wrote: Anyone willing to sell info on the trick to flashing id4 -> id6 with latest software without rebooting issue? I’ll tell you a little secret: Clear 850 doesn’t actually erase anything. Only the titles and logistics are deleted, while the software itself basically remains in place. So Clear 850 does not really help, and the IBA actually remains in place. It will remain there because it is stored on the HDD. We can’t pay, but we fully support you… emotionally.
|
|||
|
15-05-2026, 20:49 PM,
(This post was last modified: 15-05-2026, 21:00 PM by century-voyager.)
Post: #4
|
|||
|
|||
|
RE: Id4 -> id6 with latest software solution
hdd can be formatted via ssh. the same thing as you change to ssd...
i think when you stay on older istep like 18-03 clear 850 works.. so when ibadeploy(manuals...) is not flashed, evo hw2.3 with 2gb ram works really without resets using the oem navigation ???? i don´t think, that this is the solution..... running oem navigation evo can use 2,5 gb ram then it shuts down because of lack of memory... i have heard that there is a possibility to use id4 navigation container that uses less memory.... |
|||
|
15-08-2026, 19:52 PM,
(This post was last modified: 15-08-2026, 20:14 PM by HU_man.)
Post: #5
|
|||
|
|||
|
RE: Id4 -> id6 with latest software solution
[quote="It3_Magic" pid='812047' dateline='1778510098']
Anyone willing to sell info on the trick to flashing id4 -> id6 with latest software without rebooting issue? Some trick to do it, no rebooting issue, sure. EVO ID4/5/6 dumps: EVO dump and EMMC !!! & f5с
MG1 (BDC3): remote start 1CR active remotely MDG1 pre 06/20 OBD циLoск: send me 8Mb flash file All MDG1 Clone, confirm engine start OK: send me 8Mb flash file, 512kb/768kb Eeprom files |
|||
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content


![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)

