[Addyy]

Hello,
sorry Gys but I hope somebody here can Help me...thanks in advance!!!

I have a Problem with my E39 Bmw Year 2000
Its starts in Dezember last year with Car want start and want crank at all.In Inpa I could read error about Change Code for the Key is wrong or Key not recognized or wrong Key password.
I by a new Key and Ringantena but the Problem stays.
The Car starts for 3 or 4 days and after that the same with the new Key and ringantena.
Wen I disconest the conector of the EWS for a wile to make a Power on Reset the Car runs again for a 3 or 4 days and than again the same.It must be some prob with the change code in EWS I think.

Now I by a Used EWS3 and make it Virgin so I need some Help to cod it to my Car to Work with it.

I make a Backup of Original EWS and put it in the used one with BMW Scanner 1.4.
But how I need to put the Key Codes for my Key to work with it.
Do I need to code it again or Can I just put the Fixed Code of the Key as shown in the picture.How do I find the Password I need to write in the EWS?

Do I need to Lock EWS after all is done?

I would realy be Thankful if someone could help me here

Thanks in Advance!

[hamzettin]

Hello,

buy yourself tool and can teach this every ews and also used . EWS 3 can BMW Scanner not only unlock EWS 2 , if you want to apply ews 2 , then you need to make and harness change on static .

regards

---

Sorry Link...

http://www.diagtools.de/wholesale/ews-ed...r-bmw.html

[Addyy]

Sory Hamzetin but I have everything I need ,I just need to know how to put the Key codes in the EWS with BMW Scanner,it works with this hardware to.

[hamzettin]

Hello,
you have any connect a ews and read with inpa the current key and then enter . You can also use blanks or take a used ews and your copy and transfer in hand .

regards

[bond1]

You need ews editor

[CATAHA]

Hello,

buy yourself tool and can teach this every ews and also used . EWS 3 can BMW Scanner not only unlock EWS 2 , if you want to apply ews 2 , then you need to make and harness change on static .

regards

---

Sorry Link...

http://www.XXXXXXXX.de/xXXXXXX/XXXXXXXXXXXXXX.html

Don't post links in open text on forum
Read rules

[Addyy]

Thanks for your Replays,today I order EWS Editor
as soon as I get it I will try to code my EWS.