[doslamer]

Hello mates, i try to fix crash on Honda Accord 2014 srs77960-T2A-A020-M4 with mcu SPC560P50L3. I read mcu with new upausb(original), also one of my friends give me dumps for same srs but he is not shure that dumps are ok. Can anybody check and tell this second dump is it ok and can i put other software from second dump in to my srs, is it posible my srs ecu to work with other software. Also i find pin connection for diag, can i test this ecu on table?

[gsmunlock]

In archve 64kb file has crash.

[doslamer]

First dump yes it have crash, but second dump is it ok ?

[gsmunlock]

Dump must be 64k, both archives with files which are 64kb has CRASH.

[eliaselias]

Both file have crash
this is the connection instruction

[doslamer]

Fist dump is origial from srs ecu that i try to clear, i read it with original UUSP-S (UPA-USB Serial Programmer-S). But when i try to write other dump and after that read it again the dump is scrambled. Any advice what to do. So now i'm not shure that i read it correctly and after read write may be i kill the srs ecu. Can you tell me is it read good ?

[autodiagnosys]

You need to have a good external power.

[doslamer]

The external power was ok - 2x12v battery from home security system in paralel conection for more Amp's. Problem is not in power. I think may be the problem is that i use "Vref" from Programmer and this is not good because this Srs use External power and Vref is useless. Any opinion will be good.

[eliaselias]

Read it with j-link arm and every thing will be ok .... its cost 15$

[bilalalib1]

Please if you solved this crash file send me clean one.I also have same problem