[konstantin]

Hi this is a contribution to the forum from me
There are solutions for egr off in edc16 ecus.
You will cost you ........one hit to thanks button

[dadal]

I have some quenstions about EGR OFF procedure:

1-
Can I ECU read/write on bench ( after file modifacation ) or all sensors must be connected and need to read/write on car ?
2-
Need I to delete all DTC's before reading ? if so How can I delete it on bench ? ( recommend software?)
3-
Can I use an dump ( ready EGR OFF ) on an other same model ECU ?
4-
Need I to read Full Flash BDM ? ( I think well, but for sure )

Thanks

[konstantin]

1-->yes you can me prefer when i have edc16 bdm mode
2-->no. for erase you can use vcds autocom
3-->yes you can except tricores
4-->bdm=safety

[dadal]

Konstantin Thanks for your time

[8baller]

These are the example files from training package i see, still handy though

[mishu_b]

These are the example files from training package i see, still handy though

correct, and:
- first of all it is required to have knowledge about using software to edit and
-the most import, to understand how the car is working using the sw(dump) from ECU.

[konstantin]

I believe that can be base for beginners because nobody is born perfect
the key is study and learn.....

[dadal]

-the most import, to understand how the car is working using the sw(dump) from ECU.

I walk still around with that question ,,
How could you explain it in a simple way? I dont have electronic background( painter)
for example : I know where immo off bits is stored in an dump, but I dont have any idea about that bit, some time it is 00, some time 31, some time 60,
some time it is FF FF FF FF

for example : Each bit is one letter in the alphabet,
When they come next to each other, they make words ,,we can say it in this way or Im wrong ???

I want to learn communication language, or alphabet or how you can call it .