Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Mazda 6 2008 BCM problem
23-10-2017, 20:39 PM,
Post: #1
LMazda  Mazda 6 2008 BCM problem
I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?
Quote this message in a reply
01-12-2017, 22:18 PM,
Post: #2
RE: Mazda 6 2008 BCM problem
Nobody knows?

(23-10-2017, 20:39 PM)Mex165 Wrote:  I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?
Quote this message in a reply
07-12-2017, 21:42 PM, (This post was last modified: 07-12-2017, 21:43 PM by xtac1080.)
Post: #3
RE: Mazda 6 2008 BCM problem
(23-10-2017, 20:39 PM)Mex165 Wrote:  I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?

There are lots of 30A fuses in this car. Which one is blowing? What caused the initial BCM short?
Quote this message in a reply
08-12-2017, 07:24 AM,
Post: #4
RE: Mazda 6 2008 BCM problem
There is only one for locks and trunk.
That fuse is on the top middle (a while ago) by the bcm.
Micro fuse...
Quote this message in a reply
22-12-2017, 19:58 PM,
Post: #5
RE: Mazda 6 2008 BCM problem
(08-12-2017, 07:24 AM)Mex165 Wrote:  There is only one for locks and trunk.
That fuse is on the top middle (a while ago) by the bcm.
Micro fuse...

If you trace pcb inputs/outputs according to wiring diagram to the faulty double relay you might be able to solve it ..
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
LFord FORD AND MAZDA COLLECTION fantomel 57 42,734 28-05-2024, 18:59 PM
Last Post: fantomel
LMazda Module Build Data As Built FORD MAZDA Adam0773 79 42,018 21-05-2024, 05:17 AM
Last Post: Psbauto1
LFord Transit connect dtc p02ec problem guciek 2 62 20-05-2024, 20:12 PM
Last Post: guciek
  FDRS connection problem sanndo 13 1,358 21-04-2024, 20:34 PM
Last Post: petr78rus
  Mazda 3 transmission issues koziol 7 127 11-04-2024, 15:23 PM
Last Post: JorBo
  Mazda history information kowalwalcz 1 104 13-03-2024, 06:03 AM
Last Post: technoguy
  Mazda CX30 2020 Diagnostics does not connect Nikabov 3 185 21-02-2024, 12:40 PM
Last Post: pupu144
  mazda 2 1600 diesel psa engine guyf4 3 141 12-02-2024, 19:53 PM
Last Post: martink550
  mazda 3 ecu dash sync kitachu 0 102 19-01-2024, 15:04 PM
Last Post: kitachu
LMazda Solved ✔ Mazda 5 only starts with Camshaft sensor Disconnected zemanely 5 334 03-01-2024, 14:17 PM
Last Post: zemanely

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content