Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need help on VAG mechatronics controller
13-11-2017, 23:32 PM,
(This post was last modified: 14-11-2017, 09:46 AM by 23Andi23.)
Post: #1
|
|||
|
|||
Need help on VAG mechatronics controller
I got 2 mechatronics controllers , both are ending with D letter , but both been attached to Seat vehicles with 48R software, i want to get it to be VW software with 48N + 50L .. i tried with engineering but it gives an error , and asking to turn ignition off then back on again "trying with odis engineering on Jetta 2011 that got its 48Q mecha out till the test ended with no results" with project vw36x once and project se35x once both didn't work , should i do that on seat vehicle first to change it to VW ?
|
|||
14-11-2017, 10:15 AM,
(This post was last modified: 14-11-2017, 10:16 AM by apoelistas.)
Post: #2
|
|||
|
|||
RE: Need help on VAG mechatronics controller
Not sure if that will work but try it.
You might need to flash with the VW compatible firmware. Then do the o-e change. |
|||
15-11-2017, 00:01 AM,
Post: #3
|
|||
|
|||
RE: Need help on VAG mechatronics controller
|
|||
15-11-2017, 05:45 AM,
(This post was last modified: 15-11-2017, 05:49 AM by apoelistas.)
Post: #4
|
|||
|
|||
RE: Need help on VAG mechatronics controller
(15-11-2017, 00:01 AM)minooooo2012 Wrote:(14-11-2017, 10:15 AM)apoelistas Wrote: Not sure if that will work but try it. a) Your previous VW VCDs log b) ETKA at your VW parts department. Ask them for a print out (and the cost in order to think about it) c) ETKA licensed (licensed VW garages) d) ETKA NL you might be able to deduce this from other hw information in combination with flashdaten e) Sixcode or other forum users. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Solved ✔ Audi S4 B8 Elec.suspension controller problem - Help! | CenturionM | 5 | 518 |
30-03-2023, 16:00 PM Last Post: CenturionM |
|
2015 Passat DSG Mechatronics Issue Please Help | evinehh | 6 | 758 |
22-03-2023, 16:45 PM Last Post: evinehh |
|
Mechatronics of ZF 6HP-19 | Mrpiston | 4 | 666 |
23-03-2022, 21:21 PM Last Post: Mrpiston |
|
VW DSG 7 Mechatronics | Dee67 | 4 | 789 |
25-04-2019, 09:17 AM Last Post: drovid |
|
Q7 Door Controller Swap - Up/Down Buttons wrong way! | andyhud | 1 | 479 |
24-10-2018, 17:12 PM Last Post: mrbla |
|
Audi a3 8P cannot start and controller communication problem | onliest | 6 | 1,383 |
20-02-2018, 10:10 AM Last Post: onliest |
|
VW jetta door controller firmware request | rocdeng | 0 | 694 |
16-01-2017, 01:12 AM Last Post: rocdeng |
|
Help Please ,Copy DSG Mechatronics Software. | DCCD | 3 | 1,521 |
30-10-2016, 16:41 PM Last Post: DCCD |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content