Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VW CRAFTER BOSCH 0285010349
27-03-2018, 07:46 AM,
(This post was last modified: 02-04-2018, 18:30 PM by volavka.)
Post: #1
|
|||
|
|||
![]()
Hi
I have a 2011 VW crafter van in for repair. The customer originally had a fault of 38400 - n2\14 (Lowline/highline airbag control of unit)-internal fault. The original airbag ecu has been tampered with by another garage and has now got multiple faults which won't clear. I have got hold of a replacement ecu but when fitted it has one fault which is 37300 - CANbus signal key id from control of unit EZS is implausible. Any help would be appreciated. Many thanks |
|||
27-03-2018, 08:33 AM,
Post: #2
|
|||
|
|||
RE: VW CRAFTER BOSCH 0 285 010 349
You need post here file or use good file from the same unit and via Star diagnoza initialising startup ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks. Best regards. Dragon |
|||
02-04-2018, 14:11 PM,
Post: #3
|
|||
|
|||
![]()
Files attached.
Old file Gives a fault of 38400 N2/14 (Low line/high line airbag control of unit) - internal fault. New file Gives a fault of 37300 Canbus - Can signal key ID from control of unit EZS is implausible. We have tried swapping the eprom and all that did is transferred the original fault to the new ecu. ECU: 0 285 010 349 Eprom is 95320. Thanks |