Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Nissan almera tino immo
26-06-2014, 21:31 PM,
Post: #1
|
|||
|
|||
Nissan almera tino immo
Hi,i have nissan almera tino 2003 1.8 ,when battery was replaced ,car wont start,i scan with nissan consult faults are u 1000 and p1610,is it common problem on nissans,thanks for any help
|
|||
20-08-2014, 04:55 AM,
Post: #2
|
|||
|
|||
RE: Nissan almera tino immo
(26-06-2014, 21:31 PM)vaidisvaidis Wrote: Hi,i have nissan almera tino 2003 1.8 ,when battery was replaced ,car wont start,i scan with nissan consult faults are u 1000 and p1610,is it common problem on nissans,thanks for any helpU1000 Nissan - CAN Communication Line - Signal Malfunction Possible causes - Controller Area Network (CAN) communication harness is open or shorted - Faulty Engine Control Module (ECM) - Poor harness ground connection. and for P1610 Nissan - Lock Mode Possible causes - Faulty or not programmed ignition key - Faulty IMMU - Faulty Engine Control Module (ECM) try to reprogram the key and see. common problem is immo dongle failure |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content