Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A4 B8 Tail lights code
02-10-2019, 18:06 PM,
Post: #1
|
|||
|
|||
Audi A4 B8 Tail lights code
hello experts.. I have a strange problem here on audi a4 b8 avant year 2009 , it always report bulb warning on cluster iven if thay all work perfect I change them anyway with new ones..clear dtcs but problem remains.I dont no if lights was replaced before ,thay looks original.. Is there a way to code this out or something to bypass error?
here dtcs: 02199-bulb for tail light 2 : Right (M50) electrical fault in circuit 02198-bulb for tail light 2 : Left (M49) electrical fault in circuit any info apritiated |
|||
03-10-2019, 17:51 PM,
Post: #2
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
Sometimes it show dtc and checklight when original w5w are replaced with leds, if it’s original lamps maybe the connecting pins is dirty or oxidated, just try to clean them
Cheers |
|||
03-10-2019, 21:51 PM,
Post: #3
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
This is coding to remove light check for rear bulbs translated from Italian so apologize
Module 46 (CONFORT) Security Access (16) > 16017 Adaptation (10) > Channel 181 Read value and convert it in binary es: Val 65535 in binary is 1111111111111111 You need to change bits 10 And bit 11 (read right to left...) in 0, So example in binary becomes 1111001111111111 and decimal value is 62463. Now change the value With obtained one before and press TEST and then SAVE. Alternate solutions of values is 65535 put 61695 64608 put 61536 Keep in mind and be sure to have Original coding for backup just in case.... |
|||
Reputation: +2 - vagvas505x [+1] , rs@chip [+1] | |||
04-10-2019, 00:32 AM,
Post: #4
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
(03-10-2019, 21:51 PM)blackTDI Wrote: This is coding to remove light check for rear bulbs translated from Italian so apologize Ok thank you.. wil check into becouse lights seams to be original and everithing looks like new without any corozion. so need find way around I was also thinking to reflash fw on bcm if someone have corect sgo latest erwin database not have it BCM: 8K0907064M |
|||
04-10-2019, 20:28 PM,
Post: #5
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
(02-10-2019, 18:06 PM)rs@chip Wrote: hello experts.. I have a strange problem here on audi a4 b8 avant year 2009 , it always report bulb warning on cluster iven if thay all work perfect I change them anyway with new ones..clear dtcs but problem remains.I dont no if lights was replaced before ,thay looks original.. Is there a way to code this out or something to bypass error? But now I look at what 02198/99 means and related dtc is regarding seat wirings not light bulbs Maybe my mistake but my phone app and google says wiring harness for seats |
|||
04-10-2019, 20:56 PM,
Post: #6
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
(04-10-2019, 20:28 PM)blackTDI Wrote:(02-10-2019, 18:06 PM)rs@chip Wrote: hello experts.. I have a strange problem here on audi a4 b8 avant year 2009 , it always report bulb warning on cluster iven if thay all work perfect I change them anyway with new ones..clear dtcs but problem remains.I dont no if lights was replaced before ,thay looks original.. Is there a way to code this out or something to bypass error? no mate you probably mistype and gwes what your coding actualy work I yust ceked before and there is no warning anymore.. modules need to go sleep first and after second ignition dtcs gone |
|||
04-10-2019, 22:31 PM,
(This post was last modified: 04-10-2019, 23:01 PM by Clusters.)
Post: #7
|
|||
|
|||
RE: Audi A4 B8 Tail lights code
Hello my friend.
Your question I will put a link in Portuguese if you can try to translate because there is how to disable the warning. |