Possibly Related Threads…

***rana*** · 24-01-2023, 10:40 AM,

did you update with enet cable and all go fine ?

***bushido1992*** · 24-01-2023, 12:49 PM,

(24-01-2023, 10:40 AM)rana Wrote: did you update with enet cable and all go fine ?

Also with esys, you can Update with an normal enet cable! I flashed 4 cars completly with enet... All without Problems

***rana*** · 25-01-2023, 06:38 AM,

(24-01-2023, 12:49 PM)bushido1992 Wrote:
(24-01-2023, 10:40 AM)rana Wrote: did you update with enet cable and all go fine ?

Also with esys, you can Update with an normal enet cable! I flashed 4 cars completly with enet... All without Problems

as getway URL or via vin please
and about laptop leave it auto ip? or need DHCP

***guho*** · 26-01-2023, 00:23 AM,

(22-01-2023, 10:00 AM)bushido1992 Wrote: With ISTA+ and ENET you cannot flash(You get voltage error with enet)! You need ESYS (or ISTA with ICOM) BTW; I flashed mine on last Friday with ESYS. It tooks 1h40 Minutes completly flash the whole Car (S15A-22-11-530). I Used an CTEK 25A power supply.

I flashd my NBT via HTTPS in 40 Minutes (UDP ~7-9 Hours).Kombi 6WB 30 Minutes...All other ECU´s 3-5 Minutes

Did you flash with ESYS and ENET ?

***bushido1992*** · (This post was last modified: 27-01-2023, 01:19 AM by bushido1992.)

(25-01-2023, 06:38 AM)rana Wrote:
(24-01-2023, 12:49 PM)bushido1992 Wrote:
(24-01-2023, 10:40 AM)rana Wrote: did you update with enet cable and all go fine ?

Also with esys, you can Update with an normal enet cable! I flashed 4 cars completly with enet... All without Problems

as getway URL or via vin please
and about laptop leave it auto ip? or need DHCP

open esys, choose the neweset i-step and connect via vin / read parameter from vcm (my settings / standart also). I´ve changed nothin on the Laptop

(26-01-2023, 00:23 AM)guho Wrote:
(22-01-2023, 10:00 AM)bushido1992 Wrote: With ISTA+ and ENET you cannot flash(You get voltage error with enet)! You need ESYS (or ISTA with ICOM) BTW; I flashed mine on last Friday with ESYS. It tooks 1h40 Minutes completly flash the whole Car (S15A-22-11-530). I Used an CTEK 25A power supply.

I flashd my NBT via HTTPS in 40 Minutes (UDP ~7-9 Hours).Kombi 6WB 30 Minutes...All other ECU´s 3-5 Minutes

Did you flash with ESYS and ENET ?

Yes, normal ENET Cable with ESYS 3.38 + psdzdata 4.39.20 FULL

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	BMW ICOM NEXT ORI All LED RED	aloxo	4	185	Yesterday, 18:10 PM Last Post: ivanp
	[RESTARTED] icom next clone repair (only single pcb)	____ANGEL___	49	5,292	Yesterday, 15:25 PM Last Post: ferrum
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	42	8,830	30-05-2024, 19:52 PM Last Post: mars13
	ICOM Firmware (NEXT & A2) always current!	Vojno	207	44,839	25-05-2024, 20:09 PM Last Post: Neon10
	[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	113	38,110	23-05-2024, 15:42 PM Last Post: hashtagmaster
	Programming_ Changes with xx-xx I level update that are perceptible to the customer	shawnsheridan	11	2,346	22-05-2024, 13:55 PM Last Post: shawnsheridan
	ICOM resetting with 4.47	mcrussell	13	635	21-05-2024, 13:39 PM Last Post: NeRkO20
	2002 bmw e46 with no power to fuses 1-15	busaman	3	124	20-05-2024, 16:09 PM Last Post: NOAH_G
	HELP NEEDED TU UPDATE ISTA D 4.41.50 TO 4.42.12	ipcsr76	1	430	18-05-2024, 08:53 AM Last Post: piteerus
	G30 PDC, turn signal indicators, acoustic signals not working after I-Step upgrade	QuackerJack	13	390	13-05-2024, 06:13 AM Last Post: QuackerJack

Contact Us