[jenny123]

Hi all, pls kill DTC P0365 on Dacia Duster 2013 1.2 TCE

Replaced sensor, timing chain, 2x Vanos (in and out), still same -> sensor fault plus cruse control fault...

DF1012 -> cruse control fault
DF384 (P0365) -> camshaft sensor fault

duster 1.2tce 2013.zip
File Type:
Downloaded:	7 times
Size:	48.02 KB

[vopi]

Here your file without CRC. CRC must be calculated by flasher!!

If I helped you press thx+rep

[X-treme]

Hi all, pls kill DTC P0365 on Dacia Duster 2013 1.2 TCE

Replaced sensor, timing chain, 2x Vanos (in and out), still same -> sensor fault plus cruse control fault...

DF1012 -> cruse control fault
DF384 (P0365) -> camshaft sensor fault

Had this multiple times on these engines. Fault was due to too excessive play on camshaft bearings! Take valve cover off and try to push camshaft up and down with a pry bar to check play.

[jenny123]

vopi, your solution works 100% Thanks!!!

X-treme, thank you for suggestion.