Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2011 MINI COOPER D LIMP MODE, NO BOOST
|
16-02-2023, 18:59 PM,
Post: #1
|
|||
|
|||
|
2011 MINI COOPER D LIMP MODE, NO BOOST
Wonder if anyone could give me a little info regarding a mini cooper d, 2011, 1.6 tdi, no boost, limp mode, no boost leaks, this is not my car but a work colleauges, he scanned it using a low end autel and got a 4755, anyone point me in the right direction to give him a little advice where to check and how to proceed
thanks |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
17-02-2023, 20:31 PM,
Post: #2
|
|||
|
|||
|
RE: 2011 MINI COOPER D LIMP MODE, NO BOOST
Is the linkage between turbo actuator and VTG OK and moving freely? When yes, would suspect that the actuator self is faulty. With ISTA you can test the movement of turbo actuator. Check plug connection on actuator and DDE.
|
|||
|
|
|
17-02-2023, 22:27 PM,
Post: #3
|
|||
|
|||
RE: 2011 MINI COOPER D LIMP MODE, NO BOOST
(17-02-2023, 20:31 PM)unicoil Wrote: Is the linkage between turbo actuator and VTG OK and moving freely? When yes, would suspect that the actuator self is faulty. With ISTA you can test the movement of turbo actuator. Check plug connection on actuator and DDE. any other tool other than ITSA can do the actuator test?, he dont have that tool |
|||
|
|
|
17-02-2023, 23:44 PM,
Post: #4
|
|||
|
|||
|
RE: 2011 MINI COOPER D LIMP MODE, NO BOOST
Maybe, I use only ISTA for Bmw and Mini. First check the linkage between turbo actuator and VTG maybe the fault is visible by eye. With second person help it should be possible to see that the actuator is moving the VTG leaver on car start up to max point.
|
|||
|
|
|
18-02-2023, 10:26 AM,
(This post was last modified: 18-02-2023, 10:28 AM by moiloon.)
Post: #5
|
|||
|
|||
RE: 2011 MINI COOPER D LIMP MODE, NO BOOST
(17-02-2023, 23:44 PM)unicoil Wrote: Maybe, I use only ISTA for Bmw and Mini. First check the linkage between turbo actuator and VTG maybe the fault is visible by eye. With second person help it should be possible to see that the actuator is moving the VTG leaver on car start up to max point. which interface cable can be used with ISTA? only ICOM?? (17-02-2023, 23:44 PM)unicoil Wrote: Maybe, I use only ISTA for Bmw and Mini. First check the linkage between turbo actuator and VTG maybe the fault is visible by eye. With second person help it should be possible to see that the actuator is moving the VTG leaver on car start up to max point. what interface cable can be used with ISTA? only ICOM? |
|||
|
|
|
18-02-2023, 17:09 PM,
Post: #6
|
|||
|
|||
|
RE: 2011 MINI COOPER D LIMP MODE, NO BOOST
I use ICOM, but D-can should work.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Please, can somebody help me to ZCS CODE from a MINI R50? | hipolitogt | 2 | 59 |
30-05-2024, 10:30 AM Last Post: hipolitogt |
|
| VO MINI F56 | Bimmer540 | 5 | 877 |
27-05-2024, 22:09 PM Last Post: dekota28 |
|
|
Mini Connected - NBT EVO | Billyjoe69 | 1 | 103 |
25-05-2024, 14:47 PM Last Post: dumitru.o |
|
BMW/Mini strange EPS part number | Alyn546 | 4 | 120 |
23-05-2024, 07:54 AM Last Post: Alyn546 |
|
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 353 |
22-05-2024, 22:09 PM Last Post: Node |
|
|
VO required for Mini Cooper S 2004 | DirkP35 | 0 | 51 |
13-05-2024, 20:28 PM Last Post: DirkP35 |
|
|
FRM3 MINI eee solution | ArcziArcz | 4 | 251 |
11-05-2024, 07:58 AM Last Post: Dash_Burner |
| mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 237 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
|
|
Add gear display in D-Mode ZF 8HP | TIGHTFIN | 2 | 536 |
18-04-2024, 12:11 PM Last Post: viki300 |
| F97/98 2wd mode | jaramillo | 8 | 1,354 |
17-04-2024, 13:43 PM Last Post: Nightrider_67 |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
