[Commander]

Hi , I have Ford Transit 2015 ( my friend van)
The key blade was snapped in ignition so the locksmith guy comes to make new key
Hi remove the blade from ignition and make new key (?) program it but engine not crank so his change transporder - still the same. My friend take original spare key - no crank......
IDS show - on PATS status
- 3 keys programmed
- ignition key status - programmed ignition key
- initialisation status - FAILURE
So I think that it's synchronization between modules is lost.....
Please... any advice... I don't want make more mess up
Thanks

[didi70]

match ecm whith bcm , whith any scan tool biderctionnel

[fordobd]

Do you need Ford fprs with online account to link bcm abs ecu engine

it happens due to bad battery

ids does it but incode calculator 1040 need , the code changes every 10 min

[Commander]

Update
So...... The story....... the guy who was ,, try to program the new key - mess up
Key still not programmed
In the van is two batteries and one of the two was totally ,, empty,, so after good charge both batteries - clear all error codes and engine start with the original spare key .......
This is the story........
Thanks for attending to give me help