[sebiosip]

Hello, i have a mercedes a170 W169, the car was with automatic transmission but i changed with manual transmission, i took the start kit from donor car.

The car starts with start kit but the VIN get in conflict with orther modules, i don`t know if is possible to do the flash from donor car with IMMO/VIN from my ecu, in this case if the ecu have the same VIN and immo i can keep the rest of modules because they will be compatible

[ikrom]

the best way for you is clone donor -> ori ecu. renew ecu. then personalize & activate.
but firstly take a drive and be sure that all compatible , and test that problem is only in vin

[sebiosip]

the clone for ecu is not good because my ecu is for automatic transmission and i need for manual transmission, i tried to do a clone from donor car at my ecu but in the clone file is also the immo and VIN.
I succedees to change the VIN but i don`t know how to copy the iimo from my ecu at donor software.

If i use the donor ecu + donor ignition and key + steering locker the car starts but the rest of modules are in conflict VIN and blinks the cluster and radio lights in interior and at exterior blinking the headlights, with my modules all are ok.