Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
scanmatik 2 pro dont read on bench
12-09-2023, 20:00 PM,
Post: #1
|
|||
|
|||
scanmatik 2 pro dont read on bench
Hi friends
I have problem with SM2 pro clone , I can read ecu by Obd but on bench not,,, who has genuine and can du picture with transistore? Or tell me what is wrong? Thank you |
|||
12-09-2023, 20:25 PM,
Post: #2
|
|||
|
|||
RE: scanmatik 2 pro dont read on bench
i have same problem with original SM2 ,, OBD/Boot work but bench not work
BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
16-09-2023, 20:04 PM,
Post: #3
|
|||
|
|||
RE: scanmatik 2 pro dont read on bench
(12-09-2023, 20:00 PM)Harrycz44 Wrote: Hi friends hello friend, read all bosch without opening ecu module 71 but there is a trick connect positive and ground + ignition all vbat can lines gpt lines press button read or write eprom or flash next window everything ok turn on 12 v easy |
|||
16-09-2023, 21:39 PM,
Post: #4
|
|||
|
|||
RE: scanmatik 2 pro dont read on bench
We never had this issue with genuine scanmatik. All is working ok for bench reading.
|
|||
16-09-2023, 21:51 PM,
Post: #5
|
|||
|
|||
RE: scanmatik 2 pro dont read on bench
|
|||
17-09-2023, 10:43 AM,
Post: #6
|
|||
|
|||
RE: scanmatik 2 pro dont read on bench
no issue with original or clone, you are doing something wrong. you have a bench/powerbox cable ? also you have to "tick" the check box for "power" to get 12v from "l-line" to the bench cable/powerbox for bech read, if you read with "gpt" cables this check box is "on" by default.
No help for people not give a feedback
|
|||
Reputation: +2 - ROD-BENDERS [+1] , stasi [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content