[redog4dy]

Hello guys, anyone can suggest what is the problem and get error when trying to remote code kafas1 on F01, 2009-09 ? 
I tried to change country code, for RO.. did some cars and i didnt get any errors until now. 
But this time when i tried, i got error, cafd corrupted and when i try to detect swe.. i get below error. 
I can leave here the error i have, if anyone can help me. 

Regards,

[Siki78]

Turn car on not just ignition and inject cafd

[redog4dy]

Turn car on not just ignition and inject cafd

Engine was on , when tried to fdl it first time and got finished with warning. Got corrupted cafd and now cant insert cafd, vo code it.

[Siki78]

Run tal calculation and capture cafd what should to be there. Go to coding tab and edit svt_ist write cafd manually and vo code kafas.

[user_530d]

WDBI_PLAIN error is VIN, area code, country code related

[redog4dy]

I got error by ethernet.. i'll try today from his laptop to insert cafd. he already have an esys installed and will try again today.

// Update, tried from his laptop, but still got error, so, CAFD file is missing(corrupted cafd) and i cannot detect, it detects it, but when vo code, i have error .. 


  <talLine id="tl_1" status="FinishedWithError" diagBus="FA_CAN" baseVariant="KAFAS" diagAddress="5D" endTime="20231005-133712.472" startTime="20231005-133710.157" cause="ta_1" intelligentSensorsFiltered="false">
        <preparation endTime="20231005-133711.843" startTime="20231005-133711.458" status="Finished" id="prep_2"/>
        <authentication endTime="20231005-133712.203" startTime="20231005-133711.843" status="Finished" id="auth_2"/>
        <finalization endTime="20231005-133712.470" startTime="20231005-133712.377" status="Finished" id="final_1"/>
        <cdDeploy cause="ta_1" id="tg_1" status="FinishedWithError">
            <cdDeployTA endTime="20231005-133712.376" startTime="20231005-133712.203" cause="excep_3" id="ta_1" status="FinishedWithError" isSensorSW="false">
                <sgbmid>
                    <processClass>CAFD</processClass>
                    <id>00000122</id>
                    <mainVersion>003</mainVersion>
                    <subVersion>002</subVersion>
                    <patchVersion>037</patchVersion>
                </sgbmid>
                <ncd>
                    <content>S00A000000000122030225A8

                    <signature>[0, 0, 0, 32, -105, -42, -35, -113, 109, -4, -66, -109, 2, 94, -87, 112, -32, -90, -10, 13, -101, 120, -69, -41, -126, -21, -76, -45, 49, 124, -43, -16, 18, 102, -84, 52, 126, -70, 108, 8, -65, -33, 22, -99, 127, 119, 90, -74, 1, 3, 99, 30, -85, 49, 58, -75, 28, 73, 55, -77, -107, -99, -76, 68, -98, 118, 18, 43, -61, 90, 97, -68, -8, -18, 64, -64, 91, -112, 22, -51, -113, 5, 37, 117, 47, 44, -68, -59, -91, 122, -74, -101, -92, -90, 37, -112, 35, -128, 54, -35, 1, -18, -72, -80, -86, 46, 44, 42, -29, 52, -89, -73, -117, -40, -91, -48, 93, 88, 72, 101, 127, 92, -86, -100, -43, 53, 30, -9, -122, -96, -72, 94]</signature>
                    <signatureaddress>12545</signatureaddress>
                </ncd>
                <Throwable timestamp="20231005-133712.376" id="excep_3">
                    <MsgId>433</MsgId>
                    <MsgText>job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code generalProgrammingFailure; LinkName: KAFAS_5D_ETHERNET
severity: ERROR
</MsgText>
                    <MsgArgs>
                        <MsgArg>negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code generalProgrammingFailure; LinkName: KAFAS_5D_ETHERNET
severity: ERROR
</MsgArg>
                    </MsgArgs>
                    <PackageName>com.bmw.psdz.vehicle.connection.util</PackageName>
                    <ClassName>ResultUtil</ClassName>
                    <ExecutionContext>
                        <ContextCategory>TAL</ContextCategory>
                        <ecuID baseVariantName="KAFAS" diagnosticAddress="0x5D"/>
                        <ContextInfo>
                            <ContextItem key="TA_CATEGORY" value="cdDeploy"/>
                            <ContextItem key="PROGRAMMING_STATUS" value="performECUCoding"/>
                            <ContextItem key="TALLINE_ID" value="1"/>
                        </ContextInfo>
                    </ExecutionContext>
                </Throwable>
                <MCDDiagServiceEvent id="warn_2" timestamp="20231005-133712.293">
                    <MsgId>1685</MsgId>
                    <ecuID baseVariantName="KAFAS" diagnosticAddress="0x5D"/>
                    <PSdZEventType>DIAGSERVICE</PSdZEventType>
                    <PackageName>com.bmw.prodias.execution.primitives.mcd</PackageName>
                    <ClassName>SingleEcuJob</ClassName>
                    <ExecutionContext>
                        <ContextCategory>UNDEFINED</ContextCategory>
                    </ExecutionContext>
                    <MCDResponseType>NEGATIVE</MCDResponseType>
                    <JobName>com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding</JobName>
                    <ServiceName>WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value)</ServiceName>
                    <LinkName>KAFAS_5D_ETHERNET</LinkName>
                    <ErrorId>62714</ErrorId>
                    <ErrorName>error: negative response : generalProgrammingFailure</ErrorName>
                </MCDDiagServiceEvent>
            </cdDeployTA>

Any idea? i understand that flashing can fix it? Or will be error again and kafas will be bricked?