[bboctavian]

Hello, i have a vw passat b8 with error about eeprom checksum, i flash with VCP FL_5Q0910143C__2211.sgo, but now i need to flash the parametrization, who can help me with a good file and how can i do it with VCP ?

i have ORI VCP


edit:
can write file with vcp, the ZDC file find on vcp8 folder
this was mine.

passat_powersteering_maps_5q0910143c.zdc

now i have error:

Code:

Thursday,23,May,2024,08:06:31:11366
VCDS Version: Release 24.5.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com

                Address 44: Steering Assist      Labels: 5Q0-910-143.clb
Control Module Part Number: 5Q0 910 143 C    HW: 5Q0 910 143
  Component and/or Version: MQB_VWBS_GEN2 212 2211
          Software Coding: 0100001100400010
            Work Shop Code: WSC 12345 123 12345
              ASAM Dataset: EV_SteerAssisVWBSMQBGen2 002119 (VW48)
                      ROD: EV_SteerAssisVWBSMQBGen2.rod
                      VCID: 2B030DF13387F632D21-807E
3 Faults Found:

5262640 - Steering angle sensor
          B1168 54 [00001001] - Missing Calibration / Basic Setting
          Confirmed - Tested Since Memory Clear
            Freeze Frame:
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 155
                    Mileage: 322862 km
                    Date: 2024.05.18
                    Time: 01:36:05

                    Write only channel

5262656 - Steering Angle Sensor
          B1168 F2 [00001001] - Not Initialized
          Confirmed - Tested Since Memory Clear
            Freeze Frame:
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 155
                    Mileage: 322862 km
                    Date: 2024.05.18
                    Time: 01:36:05

                    Write only channel

2098435 - invalid data record
          B2005 00 [00001001] - -
          [Data record invalid]
          Confirmed - Tested Since Memory Clear