Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BOSCH ME 7.4.5 PINCODE
27-02-2016, 14:17 PM,
Post: #1
|
|||
|
|||
BOSCH ME 7.4.5 PINCODE
Hi members I wish to know what eeprom holds the pincode on peugeot 307 with bosch 0 261 208 913 ME 7.4.5 ECU.
Can xprog deal with that without any problem? |
|||
27-02-2016, 14:53 PM,
Post: #2
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
(27-02-2016, 14:17 PM)strikeforce Wrote: Hi members I wish to know what eeprom holds the pincode on peugeot 307 with bosch 0 261 208 913 ME 7.4.5 ECU. i think carprog read without Problem eeprom inside ecu 95320 BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
05-03-2016, 22:18 PM,
Post: #3
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
Please I have another question. I want to read the eeprom from this ecu in circuit using soic8 clip with xprog 5.0. my question is can I just clip on the adapter and read or do I need some additional work?
|
|||
05-03-2016, 22:29 PM,
Post: #4
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
(05-03-2016, 22:18 PM)strikeforce Wrote: Please I have another question. I want to read the eeprom from this ecu in circuit using soic8 clip with xprog 5.0. my question is can I just clip on the adapter and read or do I need some additional work? For safety work desolder eeprom BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
06-03-2016, 02:32 AM,
Post: #5
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
(05-03-2016, 22:18 PM)strikeforce Wrote: Please I have another question. I want to read the eeprom from this ecu in circuit using soic8 clip with xprog 5.0. my question is can I just clip on the adapter and read or do I need some additional work? My old note record as impossible with Xprog in circuit, all read as 00 but you may try it! (original/unmodified UPA can't neither) One good thing FYI is Piasini can also read eep correctly on this ECU via K-line, which normally this function is rarely available on other ECU's |
|||
06-03-2016, 16:37 PM,
Post: #6
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
(06-03-2016, 02:32 AM)zmann Wrote:(05-03-2016, 22:18 PM)strikeforce Wrote: Please I have another question. I want to read the eeprom from this ecu in circuit using soic8 clip with xprog 5.0. my question is can I just clip on the adapter and read or do I need some additional work? can it read successfully desoldered ? |
|||
07-03-2016, 00:29 AM,
Post: #7
|
|||
|
|||
RE: BOSCH ME 7.4.5 PINCODE
Sure, that's normal to Xprog, UPA and others
If not familiar with the file format, PIN is two times on about top, read it directly! |
|||
Reputation: +1 - strikeforce [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content