[zule]

Hi to all, I have a problem with my VW T4 2.5TDI AJT with 88hp/65kw.1999year
I generally rebuilt engine, new turbo, change the stanadyne(ajt 0.190) injectors, put the bosch(acv 0.205) injectors from acv 102hp.
My problem is the following the T4 have a lot of black smoke when gives gas or when going uphill.
I read that the parameters must be change for the injectors.
I read with MPPS the ECU(Bosch 074906018B EDC15VM+) map but do not know how to change the map.
Whether someone can help me with the map, of course I would like to have a couple of HP. more if possible because it is very lazy motor.
I'm not sure but maybe the last owner has changed something in the map,I found the original map but when i have written this map the car will not start, I do not know how to compare them
I attachment two maps the 074906018 is my map and the vw t4 should be original
For any kind of help I thank in advance, I hope to solve this problem.

[alehandro123]

Your file not correctly read

[zule]

Hi, thanks for your reply I read and write with MPPS but I could not read, write normal mode he wanted only in slow speed (recovery mode) read and write.

[budzasto]

Here are the original and the tuned file from me. also the txt file in the archives, read txt.

[zule]

Thank you, these are ACV file, I put in my T4 injectors from acv they are very similar engines, I do not know if I can try this original ACV file.
If it is possible how i can do, I can not only wirt this file because the immo