[araby80]

Hello everbody ...i need help to immo off contintal EMS 3134 for renault logan 2013 automatic steptonic transmission with engine K4M 1.6 16V the orginal ecu is burned and i can not read flash 29f400 [emoji17] and i need tested immo off solution cause i had tested alot if dumps form alot of fourms without sucsess only one dump strat the car after i cut pin 88 but the gear dose not work if any body have 2 paired dumps for uch eeprom 95040 and ecu flash 29f400 i can make a key

Best regards for all

Sent from my SM-J700H using Tapatalk

[alfabit]

Also answered you on other place, but how can`t read 29f400 ?? Do you have an ordinary willem or TL866 to desolder and read by progarmmer ? You can read only by boot mode or expensive tools, not fancy to read in programmer anymore ?

[rui fernando]

Not much has not secret, not first change the BSY not program the chip ja ta married her ok. so just put this reset file that will post after so and turn the key and will be ready.

---

so put this program in sop and ready.