Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to read micronas
|
15-11-2016, 09:09 AM,
Post: #1
|
|||
|
|||
|
How to read micronas
Hello all masters i need help to read this micronas cdc3217g+24c32 from 8P0920932j dash any help will be appreciated thanks in advance.
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
15-11-2016, 10:01 AM,
Post: #2
|
|||
|
|||
|
RE: How to read micronas
Carprog,xprog m.
|
|||
|
|
|
15-11-2016, 10:18 AM,
Post: #3
|
|||
|
|||
|
RE: How to read micronas
|
|||
|
|
|
15-11-2016, 14:41 PM,
Post: #4
|
|||
|
|||
|
RE: How to read micronas
You need to use the s12 adapter and then connect like this one i have done some of them without any trouble but i have original xprog from eldb ...
(15-11-2016, 10:18 AM)amanorcottage Wrote:(15-11-2016, 10:01 AM)darek_naprawa Wrote: Carprog,xprog m. |
|||
| Reputation: +1 - al70 [+1] | |||
|
|
|
15-11-2016, 15:01 PM,
Post: #5
|
|||
|
|||
RE: How to read micronas
(15-11-2016, 14:41 PM)cerrajeriaarcoiris Wrote: You need to use the s12 adapter and then connect like this one i have done some of them without any trouble but i have original xprog from eldb ...thanks boss i will do that and let you know. but xprog want me to do some modification on this adapter is it neccesry? |
|||
|
|
|
15-11-2016, 15:11 PM,
Post: #6
|
|||
|
|||
|
RE: How to read micronas
I dont think so maybe if you hace the oldest adapter or hardware but for your versión i dont think so but its important that you connections very careful and match them with xprog help and you have to remove 0 ohm resistor only you dont need to lift anything...
|
|||
|
|
|
15-11-2016, 21:31 PM,
Post: #7
|
|||
|
|||
RE: How to read micronas
(15-11-2016, 15:11 PM)cerrajeriaarcoiris Wrote: I dont think so maybe if you hace the oldest adapter or hardware but for your versión i dont think so but its important that you connections very careful and match them with xprog help and you have to remove 0 ohm resistor only you dont need to lift anything... hello boss i have done as you said with the pin out you gave me but still give bypassing security error check connection i have check all the connection again and every thing is alright any other way out ? |
|||
|
|
|
16-11-2016, 07:59 AM,
Post: #8
|
|||
|
|||
|
RE: How to read micronas
Hello i don 't know if you can help again but i couldn't read the micronas, but i have the eeprom 24c32 is you can generate cs and pin for me i'll be grateful.
|