[abcd2k5]

Hi all,

I have a problem with my vas5054 adapter.

It worked fine with ODIS 3.0.3 till now. I connected the adapter to VASPC19 via usb cable. I guess it refreshed it's firmware.
Now it can't connect to ODIS. I tried to reflash the firmware but it can't help

VAS used 1.10.48 PDU, It can connect with it, so the adapter is working with VAS, bot no with ODIS.

It just said:
Return of PDUModuleConnect:
PDU_ERR_FCT_FAILED: PDU function call failed

Am I fu*ked it?

[kar407]

I think you have probleme in odis software. reinstall

[abcd2k5]

I think you have probleme in odis software. reinstall

It doesn't work on other computer neither same error message.

mod:
Ok, I managed to get it work again. But wasn't easy.

I needed to install odis 1.2.0, flash with it, reinstall. Install odis 2.0.2 and flash with it, reinstall. And after this I can flash again with 3.0.3 firmware and works again. Weird...

[Hitman0079]

Hello.
I have installed the odys software but ODIS 3.0.3 does not recognize the 5054A interface.
Serial Number and VCI Search for ID. Where can I add ???

[kiranabc]

you Need the right Firmware in the VAS5054

[abcd2k5]

Hello.
I have installed the odys software but ODIS 3.0.3 does not recognize the 5054A interface.
Serial Number and VCI Search for ID. Where can I add ???

Use EDIC configuration manager to add new device.

[Hitman0079]

Hello.
I have installed the odys software but ODIS 3.0.3 does not recognize the 5054A interface.
Serial Number and VCI Search for ID. Where can I add ???

Use EDIC configuration manager to add new device.

Thanks, Try It!