Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO2 ID5 Coding question
14-11-2018, 21:43 PM,
(This post was last modified: 14-11-2018, 21:47 PM by agad.)
Post: #1
|
|||
|
|||
NBT EVO2 ID5 Coding question
Hi everyone, I have a question with regards to the coding of my nbt headunit in my car.
My car is a 2016 F30 that came from factory with nbt evo id4, I just retrofitted yesterday a 3.1 evo2 with id5, i installed it using an emulator as I need the traffic updates as well as the active connected drive services from the donor vin as the one linked to my vin has expired a month ago. I’ve changed the built date to 3/2017 and VO coded the headunit to my FA after injecting the correct CAFD files. Now the headunit is fully coded to my car and all features from the donor vin are active. The only thing I’m concerned about is the vehicle image, the nbt is displaying an image of a F33 car in all locations, for example, when using the PDC or when checking the tyre pressure etc. I don’t really understand why its showing this after being VO coded but I’d assume the nbt is getting those images from the vin written on the nbt which is obviously a F33 and not a F30 car. I’d appreciate very much if somebody would help in sorting this out as I’m sure there must be a line to manually change in the nbt FDL as normally this line would have been amended during the VO coding which did not happen in my case! Also after updating to id6 lite, the vehicle diaplayed in the tile at the home screen is a 5 series G20 which is quite annoying, so it would be great if there is a line to change this tile photo as well Many thanks guys! |
|||
14-11-2018, 21:59 PM,
Post: #2
|
|||
|
|||
RE: NBT EVO2 ID5 Coding question
HuNBT2 - 3004 - BAUREIHE - change to what car you want
|
|||
14-11-2018, 22:05 PM,
Post: #3
|
|||
|
|||
RE: NBT EVO2 ID5 Coding question
Thanks very much mate! Is there any chance to change this G20 in the home screen?
Many thanks! |
|||
14-11-2018, 22:09 PM,
Post: #4
|
|||
|
|||
RE: NBT EVO2 ID5 Coding question
Yes in the 11-07 istep i see that i can Select G20 and images changes accordingly....
|
|||
14-11-2018, 22:16 PM,
Post: #5
|
|||
|
|||
RE: NBT EVO2 ID5 Coding question
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content