[Theor32]

hello i install ista+ 4.36.40 and when i connect in my car all wiring diagrams find . when i open ista+ out of my car some wiring diagrams no find . (SSP SUPPLY )

[2013m5]

hello i install ista+ 4.36.40 and when i connect in my car all wiring diagrams find . when i open ista+ out of my car some wiring diagrams no find . (SSP SUPPLY )

VIN?
I tested with i4 VIN for EME and DSC both were found, but some may not find as same as old version.
   
   

[Theor32]

WBALS010200v45717 and check wiring diagram ( Auto soft close ) and ( central locking ) thank you

[2013m5]

Text search "Central Lock". Are these what you're looking for?
   
   
   

[Theor32]

I want to find wiring diagram like photo posted .

[2013m5]

You may have to disconnect the door jamb connector to set the fault, and run vehicle test / Calculate test plan to get the wiring diagram as you're looking.

[Theor32]

You may have to disconnect the door jamb connector to set the fault, and run vehicle test / Calculate test plan to get the wiring diagram as you're looking.

Yes I know this . When I connect ista in my car and test complete via enet all ok . I open the body and I see locking and then I open all the wiring diagrams . The problem is when I open ista out of my car I see is missing some wiring diagrams ( central locking , mirrors , lighting, wipes.) . At the old ista version no problem for that . Open all out of car