[iTudor]

I tried 2 different maps from 2 different tuners, both supposed to have DPF and EGR off

but for some reason after 10 min of driving, idrive and dashboard still displays DPF fault, after restart car it goes away, for another 10 min.

in diagnosis there are 0 faults, nothing at all shows up.

any ideas whats wrong? is it the tune? is it something else?

also, anyone could check if this one has vmax off?

E91 330d tune+ dpf + egr off.rar
File Type:
Downloaded:	6 times
Size:	360.33 KB

[PelsonBMW]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

[iTudor]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

nope...

So I should load ORI, then reset the DPF % and tell the car dpf is replaced, and then write tune file, and do the same again?

[PelsonBMW]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

nope...

So I should load ORI, then reset the DPF % and tell the car dpf is replaced, and then write tune file, and do the same again?

Thats the safest way for not to get error on dash and HU

[iTudor]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

nope...

So I should load ORI, then reset the DPF % and tell the car dpf is replaced, and then write tune file, and do the same again?

Thats the safest way for not to get error on dash and HU

tried that, reloaded ori file, deleted faults, resetted the DPF and the dpf % in ISTA, loaded tuned map with dpf off, did the same again. fault still persists.... maybe its something in the map thats wrong?

[CKgrg]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

nope...

So I should load ORI, then reset the DPF % and tell the car dpf is replaced, and then write tune file, and do the same again?

Thats the safest way for not to get error on dash and HU

tried that, reloaded ori file, deleted faults, resetted the DPF and the dpf % in ISTA, loaded tuned map with dpf off, did the same again. fault still persists.... maybe its something in the map thats wrong?

test please 
resetted dpf 

and ori file send please

[CenturionM]

have you make reset of DPF before writing file and after writing file ? if not it will persist .

nope...

So I should load ORI, then reset the DPF % and tell the car dpf is replaced, and then write tune file, and do the same again?

Thats the safest way for not to get error on dash and HU

tried that, reloaded ori file, deleted faults, resetted the DPF and the dpf % in ISTA, loaded tuned map with dpf off, did the same again. fault still persists.... maybe its something in the map thats wrong?

try to rip the map with the full BDM option and send it here

[Koira]

Your dpf-off is missing a few things.