Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
coding g12 remote key /m display
25-03-2024, 12:33 PM,
(This post was last modified: 25-03-2024, 12:34 PM by redog4dy.)
Post: #1
|
|||
|
|||
![]()
Hello,
I've coded on bdc2 g12, 2017-07 display key /M - logo select mpa but coding didnt take effect, any idea what should i do after coding to work? Key rebooted also, nothing happened. Regards, learning to code BMW..
|
|||
25-03-2024, 18:46 PM,
Post: #2
|
|||
|
|||
RE: coding g12 remote key /m display
Put key on wifi charger if G12 have one. On G30 is on this way
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
26-03-2024, 06:11 AM,
Post: #3
|
|||
|
|||
RE: coding g12 remote key /m display
(25-03-2024, 18:46 PM)Siki78 Wrote: Put key on wifi charger if G12 have one. On G30 is on this way tried it already, also rebooted key, but didnt take effect.. learning to code BMW..
|
|||
26-03-2024, 06:36 AM,
Post: #4
|
|||
|
|||
RE: coding g12 remote key /m display
If you code this line should to be ok
BDC: 3D01 RemoteControlIntegration -> RCI LOGO SELECT -> AG = BMW-Logo, MSP=M-Logo Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
26-03-2024, 06:50 AM,
(This post was last modified: 26-03-2024, 06:51 AM by redog4dy.)
Post: #5
|
|||
|
|||
RE: coding g12 remote key /m display
(26-03-2024, 06:36 AM)Siki78 Wrote: If you code this line should to be ok yes, this is the line i coded ![]() Any idea if when coding is written, key needs to be already in charger tray? learning to code BMW..
|
|||
26-03-2024, 07:23 AM,
Post: #6
|
|||
|
|||
RE: coding g12 remote key /m display
No after that I put key on wifi charger wait little bit then restart key
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content