[m35i]

Hi friends, i have a problem with Audi a3 8p years 2005 , after try make key with FVDI the car not start and not can make any key .
In cluster put SAFE 0kms and DEF.0 when off ignition.......

Give me error 16348 error checksum in cluster.

Someone have any solution ???

i read the eeprom of cluster i think that is good.......
someone know if i can update sw flash of cluster???

[octav_kiss]

Tried with digiprog 3
and lift + batery
normal with digiprog work 100%

[m35i]

But digiprog is for change kms only..... I think that the problem is the eeprom of cluster or the flash.....

[shogunv2]

Digiprog has immo functions as well, but it won`t fix def error, avdi will so maybe fvdi has option to fix as well,
what function did you use to make key? did you use can cluster read or key wizard?
Also what cluster is fitted to car?

[m35i]

Digiprog has immo functions as well, but it won`t fix def error, avdi will so maybe fvdi has option to fix as well,
what function did you use to make key? did you use can cluster read or key wizard?
Also what cluster is fitted to car?

i use special funtion/ learn key / standar mode......

the cluster is install in the car .....

[shogunv2]

What cluster type is it?
Also try read cluster with can cluster function and not key learning and see if it gives you an immo status field, it should show as `6` immo learned if not change to 6 and relearn keys.

Did you `precode` keys with key programmer before attempting to learn to car?