[kurt2007]

I bought digimaster 3.

ve tried the first my own car

BMW E93 2011.

1. to until I coded my cas


1 .hab then built and tasted has unfortunately nothing had changed and I even 5 km Ridden

2. then I have my dash coded

3. red dot defects manipulation point

4. then again I wanted programieren dash . but was no longer .

either I have the wrong soldered the chip is broken or is locked


chip is D80D0wQ

I have now ordered a new chip.


I 've also done backup file with Digimaster 3.



How should I proceed with Digimaster 3 now that it really works.


i need help Please.


Sorry for my bad english

[kurt2007]

Is there a sequence where I need to know .

only cas then dashbord or both simultaneously

[teerak2uk]

Dash first
1.Desolder Read/save

2.Edit/write to new chip and solder
back to cluster

3.Do cas to 1234

Then plug in cluster to car

[kurt2007]

Cas 1234 i dont understand

thanks

[Fraz]

Basically you can set the CAS mileage to anything as long as it is lower than what the speedo is set to.