[welsh]

Hi all.. need help. so got asked to go look at a VW non start.
old 8 valve pre PD with x2 27c010 HHH LLL ECU. Car has starter motor.
glow light goes on and off as it should.. but immo light flashes.
so connect up to diagnostics. and no communication with any module! not one.. so go straight to ECU to immo off. (ECU 0 281 001 846- 038 906 018 BM 2 plug) go to eeprom 24c02 (mask B58253) but shows all FF FF FF blank. desolder read again same. there was a second ecu. exactly same. read 24c02. and more FF FF FF.

So question i have.. where is immo with this? immo box under dash?? (1j0 959 799 AH) has any one done this before?? and please advise? just want it to run.. no care for anything else.. clue where immo is. how to read. and solution to deactivate.

would be great help!!

Thanks in advance.

[junnnior]

Hi
immo offffffffffffffffffffffffffffffffffffffffffffff

[welsh]

Hello.. thank you for quick reply. can you confirm which 24c02 you program this to?? as both ecus i have with mask b58253 (24c02) are blank when read. every time? even one i de-solder from pcb. any pictures to help??? thanks

---

this the one ive attempted with two same ecu which both read..
FF FF FF FF FF FF all way through (blank)